Abstract:The recycled powder produced in the process of crushing concrete and brick waste (C&BW) into recycled aggregate will cause environmental pollution. To realize the green full recycling of concrete and brick waste, the cement stabilization of crushed aggregate (CSCA) containing recycled brick-concrete composite micropowder (RBCP) and recycled brick-concrete composite aggregate (RBCA) is proposed. In this paper, RBCP, recycled brick-concrete composite fine aggregate (RBCFA), and recycled brick-concrete composite coarse aggregate (RBCCA) were the recycled materials from C&BW. The orthogonal test table was used to analyze the effects of the three recycled materials on the compaction characteristics, mechanical properties, and shrinkage behavior of CSCA at different dosages. The effects of RBCP, RBCCA, and RBCFA on the properties of CSCA are studied by variance analysis methods. On this basis, the micromorphology and the interface transition zone (ITZ) were studied for CSCA and the cement stabilization of crushed aggregate with RBCP, RBCFA, and RBCCA through scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS), and the mechanism was revealed. The results indicate that the addition of RBCP and RBCA can increase the optimal water content while decreasing the optimal dry density of CSCA, and the influence of RBCCA on the optimal water content is greater than that of RBCFA. Three optimal composite replacement systems for CSCA, including 20% RBCP/20%RBCFA/40%RBCCA, are proposed and have the best mechanical and antishrinkage performance through the range analysis. Furthermore, the variance analysis test results show that RBCCA and RBCFA have the most significant effect on the compressive strength and shrinkage strain properties, while RBCP has the most significant effect on the bending tensile strength. It is found that RBCP played a filling effect and pozzolanic activity in the strength formation of CSCA. The SEM/EDS test shows that the CSCA with recycled materials produced the Ca/Si ratio in the interfacial zone between the cement paste and aggregate lower than the CSCA without recycled materials, the largest decline 52.83%. The research results of this paper can provide the potential application of RBCP and RBCA.

The triaxial test of construction and demolition (C&D) materials with different particle sizes and sand contents

High-strain Rate Compressive Behavior of Concrete Made with Substituted Coarse Aggregates: Recycled Crushed Concrete and Clay Bricks

Influences of fines content on cyclic resistance ratio of fines-sand-gravel mixtures

Estimation of Resilient Modulus of Cement-Treated Construction and Demolition Waste with Performance-Related Properties

Investigating the Effects of Recycled Micropowder and Aggregate on the Properties of Cement Stabilization of Crushed Aggregate (CSCA)

Experimental Research on the Mechanical Properties of Recycled Aggregate Particle Gradation and Addition on Modified Cement Soil

Evaluating the Crushing Characteristics of Recycled Construction and Demolition Waste for Use in Road Bases

Effect of particle distribution on the shear behavior of recycled concrete aggregate

Effects of varied building solid wastes, particle sizes and substitution ratios on the performance and impedance spectrum of recycled fine aggregate mortar and the feasibility of developing a prediction method

Preliminary Feasibility Investigation on Reutilization of Recycled Crushed Clay Bricks from Construction and Demolition Waste for Cement-Stabilized Macadam

Effects of Moisture Content on the Cyclic Behavior of Crushed Tuff Aggregates by Large-Scale Tri-Axial Test

Resilient and permanent deformation behaviors of construction and demolition wastes in unbound pavement base and subbase applications

Constituent Effect on Mechanical Performance of Crushed Demolished Construction Waste/silt Mixture

Triaxial compressive performance of recycled aggregate/glass sand concrete: Experimental study and mechanism analysis

Mechanical behavior and particle breakage of calcareous sand in triaxial test

3D printed concrete with recycled sand: Pore structures and triaxial compression properties

Meso-scale damage characteristics of low carbon concrete with recycled aggregate based on in-situ CT test

Triaxial mechanical behaviours and life cycle assessment of sustainable multi-recycled aggregate concrete

Study on Mechanical Properties and Mesoscopic Numerical Simulation of Recycled Concrete

Mechanical properties of recycled aggregate concrete containing brick particles

Experimental Study on the Mechanical Properties and Permeability of Cement-Stabilized Permeable Recycle Aggregate Materials