Abstract:Li4Ti5O12, a commercial anode material, is used for solid state electrolyte for the first time via forming a composite with poly(vinylidene fluoride). Endowed by its ion transport ability and electrochemical activity, an electronic/ionic mixed conductive phase spontaneously forms at electrolyte‐lithium anode interface, which contributes to stable performance in solid lithium metal battery. In parallel with researches unveiling the nature and mechanism in solid state battery, numbers of investigations have been pursuing methods to stabilize their performance as well as to reduce the cost. Simple preparation and earth‐abundant ingredients are preconditions for a solid state electrolyte to be suitable for scalable production. In this work, a commercial anode active material, spinel Li4Ti5O12, is introduced for the first time, which has high ionic conductivity to sustain high rate charge/discharge with considerable high performance/cost ratio, into poly(vinylidene fluoride) to achieve a composite solid electrolyte. The membrane solid electrolyte containing 80 wt% of the Li4Ti5O12 (LTO‐8) shows outstanding ionic conductivity of 2.87 × 10−4 S cm−1 at 35 °C and inhibits electronic conductive network. The self‐sacrificed interface contributes to the stabilized performance of the composite. Li||LiFePO4 cells with LTO‐8 present a discharge specific capacity of 150 mAh g−1 at 0.5C and a considerable average specific capacity of 119 mAh g−1 under 5C in 400 cycles, demonstrating its excellent working performance. This investigation provides promising application of Li4Ti5O12 for solid state electrolytes, which is superior to the reported solid state electrolytes in comprehensive performance, and surely paves another commercial way to solid state batteries.

A simple and effective method to prepare dense Li1.3Al0.3Ti1.7(PO4)3 solid–state electrolyte for lithium-oxygen batteries

Aqueous Tape Casting Phosphate Ceramic Electrolyte Membrane for High Performance All Solid-State Lithium Metal Battery

Recent Advances in Li1+xAlxTi2−x(PO4)3 Solid-State Electrolyte for Safe Lithium Batteries

Facile Route to Synthesize a Highly Sinterable Li1.3Al0.3Ti1.7(PO4)3 Solid Electrolyte

Preparation and electrochemical properties of a ceramic solid electrolyte with high ionic conductivity, Li1.3Al0.3Ti1.7(PO4)3

Enhancing the cycling stability of all-solid-state lithium-ion batteries assembled with Li1.3Al0.3Ti1.7(PO4)3 solid electrolytes prepared from precursor solutions with appropriate pH values

High Li+ Conductivity of Li1.3+xAl0.3−xMgxTi1.7(PO4)3 with Hybrid Solid Electrolytes for Solid‐State Lithium Batteries

Optimization of sintering process on Li1+Al Ti2-(PO4)3 solid electrolytes for all-solid-state lithium-ion batteries

Preparation and Evaluation of High Lithium Ion Conductivity Li1.3al0.3ti1.7(Po4)(3) Solid Electrolyte Obtained Using A New Solution Method

Two-step sintering technique of LATP ceramic electrolyte with enhanced key parameters

A Solid Electrolyte Based on Electrochemical Active Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> with PVDF for Solid State Lithium Metal Battery

Synthesis and sintering of Li1.3Al0.3Ti1.7(PO4)3@Li2O‐2B2O3 core‐shell solid electrolyte powders prepared via one‐pot spray pyrolysis

Engineering and regulating the interfacial stability between Li1.3Al0.3Ti1.7(PO4)3-based solid electrolytes and lithium metal anodes for solid-state lithium batteries

A Solid Electrolyte Based on Electrochemical Active Li4Ti5O12 with PVDF for Solid State Lithium Metal Battery

Cold-sintering assisted process enables densified and robust fine-grained Li1.3Al0.3Ti1.7(PO4)3 electrolytes for solid-state batteries

Fabrication of Li1.4Al0.4Ti1.6(PO4)3 quasi-solid electrolyte with high conductivity and compatibility through AAO template

Enhanced ionic conductivity and electrochemical stability of Indium doping Li1.3Al0.3Ti1.7(PO4)3 solid electrolytes for all-solid-state lithium-ion batteries

High-performance lithium metal batteries based on composite solid-state electrolytes with high ceramic content

Fabrication and characterization of Ag-doped Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte with high ionic conductivity

Hybrid solid state electrolytes blending NASICON-type Li1+xAlxTi2–x(PO4)3 with poly(vinylidene fluoride-co-hexafluoropropene) for lithium metal batteries

Recent Advances in Conduction Mechanisms, Synthesis Methods, and Improvement Strategies for Li1+xAlxTi2−x(PO4)3 Solid Electrolyte for All‐Solid‐State Lithium Batteries