Effect of progressive solid-solution treatment on microstructures, mechanical properties and impact abrasive wear behavior of alloyed high manganese steel

Zulai Li,Haibin Wang,Yuelin Zhao,Lei Wu,Fei Zhang,Quan Shan

DOI: https://doi.org/10.1088/2053-1591/ac5cad

IF: 2.025

2022-03-01

Materials Research Express

Abstract:Abstract Alloyed high manganese steel is a general type of wear-resistant steel, and its precipitates and austenite matrix grain sizes play an important role in impact abrasive wear behavior. Solid-solution treatment is an effective method to balance the size of the austenite grains and precipitates. This work attempts to find a new progressive solid-solution treatment to make alloyed high manganese steel castings refine the microstructure and balance the wear resistance under impact abrasive wear conditions. Compared with traditional solid-solution treatment, the MC- and M 23 C 6 -type carbide precipitates resulting from progressive solid-solution treatment decrease, and the tensile strength and impact toughness of steel are significantly increased. After the solid-solution treatment at different heating rates, the grain refinement effect is remarkable after shortening the holding time at 1100 °C and increasing the heating rate to 150 °C h −1 . The impact abrasive wear test results show that, compared with the traditional solid-solution treatment at 1100 °C for 4 h, the wear resistance of high manganese steel has a 23.1% improvement after progressive solution treatment at 1100 °C for 2 h, and the wear failure forms of all the experimental steels are microcutting, oxidation wear and plastic deformation.

materials science, multidisciplinary