Abstract:<p>Carbon fibre-reinforced polymer (CFRP) plates are widely used to strengthen reinforced-concrete (RC) structures. At present, most studies focused on the short-term performance of strengthened RC beams with a prestressed CFRP plate, and very limited information is available on their durability, which is of importance in certain cases, such as high-piled wharfs and bridges in marine environments. This study investigates the effects of chloride environment exposure on the flexural performance of strengthened RC beams with self-anchored prestressed CFRP plates. In total, seven RC beams, four of which were strengthened by a self-anchored prestressed CFRP plate, were fabricated and tested under three-point bending. The testing parameters included 25% and 40% prestress level of the ultimate tensile strength of the CFRP plate, 5% and 10% tensile steel rebar corrosion ratio of mass loss and 10% and 20% anchor corrosion ratio in the chloride environment. The evolution of time-dependent prestress losses in the strengthened beam was determined, and the flexural behaviour of the strengthened beams was analysed. A theoretical model is proposed to predict the flexural strength of prestressed CFRP strengthened RC beams in a chloride environment. The experimental results indicated that the coupling of the corrosion expansion of the metal anchor and rebar in the chloride environment had a large negative effect on the flexural performance of the beams strengthened by the self-anchored prestressed CFRP plates. After exposure to the chloride ion solution, the failure mode of the RC beams strengthened by the prestressed CFRP changed from concrete crushing in the compression section to anchor pullout. The proposed model, which considered the effect of a chloride environment to predict the flexural strength of the strengthened beams, agreed well with the test results.</p>

Stiffness and Crack Behavior of Unbonded Posttensioned Concrete Beam Strengthened with Aluminum Alloy Plate

Experimental Study of Concrete Strengthened by Stiffened Aluminum Plate

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

Crack Propagation and Flexural Behaviour of Rc Beams under Simultaneous Sustained Loading and Steel Corrosion

CFRP Strengthened RC Beams with Pre-Strengthening Non-Uniform Reinforcement Corrosion Subjected to Post-Strengthening Wetting/drying Cycles

Stiffness Degradation for Fatigue of Reinforced Concrete Beams after Electrochemical Rehabilitation

Effect of Corrosion on Bond Behavior and Bending Strength of Reinforced Concrete Beams

Deflection and Crack Calculation of Corroded Reinforced Concrete Beams

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Effect of Chloride-Induced Reinforcing Steel Corrosion on the Flexural Strength of Reinforced Concrete Beams

Study of A Reinforced Concrete Beam Strengthened Using A Combination of Sma Wire and Cfrp Plate

Effect of Local Bond Behavior Degradation on Tension Stiffness in Reinforced Concrete with Pre-existing Longitudinal Cracks

Case Study on Prestressed CFRP Plates Applied for Strengthening Hollow-Section Beam Removed from an Old Bridge

Study on Debonding Failure Behavior of RC Beams Combination Strengthened with Carbon Fiber Reinforced Polymer and Steel Plates

Behavior of Pre-Cracked Reinforced Concrete Beam Strengthened with Prestressed CFRP Plate

Recycled concrete beams subjected to combined reinforcement corrosion and static pre-loading

Effect of the chloride environmental exposure on the flexural performance of strengthened RC beams with self-anchored prestressed CFRP plates

Experimental Study on the Bending Resistance of Hollow Slab Beams Strengthened with Prestressed Steel Strand Polyurethane Cement Composite

Shear behavior of pre-damaged RC beams strengthened with steel plate and UHPC

Experimental study on simply supported RC beams strengthened by steel plate-concrete composite technique

Improvement of the flexural and cracking behavior of RC beams using ultra-high toughness cementitious composites(I):theoretical analysis