Abstract:In order to measure the frequency of a sinusoidal signal in high precision,the article designs a digit frequency meter based on FPGA (field programmable gate array).Besides measuring frequency,the device can also measure the time interval of two square signals and the duty ratio of a pulse signal.With FPGA and MCU (micro control unit) as the kernel,the meter adopts the method called ‘Parallel Multi-Ways Counting Method’ to realize the high precise measurement.Specifically,signals would input FPGA after high frequency amplification module and high frequency comparing module.And then signals would be divided into multi-ways to decrease frequency by different times and be counted synchronously.Finally,MCU would select the mostaccurate result and get the final result after computing.After the test,the meter can measure the frequency of a sinusoidal signal from 1 Hz to 199 MHz and from 10 mVrms to 1 Vrms with the relative error not above 0.0001％;the meter can measure the time interval of two square signals from 50 mV to 1 V and from 100 Hz to 1 MHz with the relative error not above 1％;the meter can measure the duty ratio of a pulse signal from 50 mV to 1 V and from 1 Hz to 5 MHz with the relative error not above 1％.Therefore,the meter has thefeature of high precision,wide frequency range and wide amplitude.

Simple design of digital frequency meter based on microcomputer

Design of Intelligent and Low-Power for Vortex Flow-Meter

Design of A Programmable Multi Frequency Detector

Design on DC Digital Voltage Meter Based on C Language

Design of High-Accuracy Multiple-Function Dual-Path Frequency Meter

Application Of Soc Zigbee Technology In The Remote Reading Meter System

Design of PPS Self-Calibration High-Precision Frequency Meter Based on STM32 Single Chip Microcomputer

Design of low-frequency phase meter based on STM32 single chip microcomputer

Design of a simple DC digital voltmeter

Design of high precision frequency meter with FPGA

Design of simple digital oscilloscope

The Design of Simple and Digital Control Transistor Tester

Simple digital inductance meter

Instrument Designed for Measuring Electrical Parameters of Variable Frequency Motor Based on DSP

Design and Accomplishment of Digital Power Quality Meter Based on C8051F120

Design of 3-Phase High Precision Electric Power Meters Based on High Speed Single Chip Computer

Design and Implementation of Simple Digital Oscilloscope Based on STM32

Design and Make of the Degital Power Instrument

Hardware design of digital multimeter based on VXI bus

Advanced Frequency Identification Power Metering System for Energy Usage

Design of a Taxi Meter Based on Single Chip Computer