Abstract:In order to measure the frequency of a sinusoidal signal in high precision,the article designs a digit frequency meter based on FPGA (field programmable gate array).Besides measuring frequency,the device can also measure the time interval of two square signals and the duty ratio of a pulse signal.With FPGA and MCU (micro control unit) as the kernel,the meter adopts the method called ‘Parallel Multi-Ways Counting Method’ to realize the high precise measurement.Specifically,signals would input FPGA after high frequency amplification module and high frequency comparing module.And then signals would be divided into multi-ways to decrease frequency by different times and be counted synchronously.Finally,MCU would select the mostaccurate result and get the final result after computing.After the test,the meter can measure the frequency of a sinusoidal signal from 1 Hz to 199 MHz and from 10 mVrms to 1 Vrms with the relative error not above 0.0001％;the meter can measure the time interval of two square signals from 50 mV to 1 V and from 100 Hz to 1 MHz with the relative error not above 1％;the meter can measure the duty ratio of a pulse signal from 50 mV to 1 V and from 1 Hz to 5 MHz with the relative error not above 1％.Therefore,the meter has thefeature of high precision,wide frequency range and wide amplitude.

Design of low-frequency phase meter based on STM32 single chip microcomputer

Design of Intelligent and Low-Power for Vortex Flow-Meter

Design of PPS Self-Calibration High-Precision Frequency Meter Based on STM32 Single Chip Microcomputer

Design of High-Accuracy Multiple-Function Dual-Path Frequency Meter

Design and Implementation of Digital Frequency Meter Based on SCM

Design of digital millisecond meter based on single-chip microcomputer

Design of High-Precision Field Test Equipment for Power Meter

Design of 3-Phase High Precision Electric Power Meters Based on High Speed Single Chip Computer

Simple design of digital frequency meter based on microcomputer

Design of Single-Phase Intelligent Meter Based on RFID Semi Active Technology

Design and Implementation of Simple Digital Oscilloscope Based on STM32

Design and Implementation of a HF Wireless Modulation Signal Analyzer Based on STM32

Design of full digital combined meters in automobile based on ST72F561

Design of high precision frequency meter with FPGA

DESIGN AND IMPLEMENTATION OF DUAL-CHANNEL INTELLIGENT MEASURE AND CONTROL METER BASED ON AT89C51 SINGLE-CHIP MICROCOMPUTER

Design of SCC'S Multi-purpose Experiment Meter Based on ATmega8

Development of Conductivity Meter Based on C8051F Single-chip

Design on DC Digital Voltage Meter Based on C Language

Design of Networked Intelligent Electronic Water Meter Based on MSP430 Single Chip Computer

Design of AC Voltage Tester Based on STM32

A High Precision Electronic Scale Based on STM32