Abstract:Li metal is a promising anode material for next-generation Li-metal battery systems due to its ultra high theoretical capacity (3860 mAh g-1) and low electrochemical potential (-3.04 V vs. standard hydrogen electrode). However, the instability of Li metal towards liquids electrolytes, unstable solid electrolyte interphase (SEI) formation, and dendritic lithium have caused significant safety concerns that have inhibited its commercialization [1]. It is believed that artificial SEI layers formed through various techniques can stabilize the Li metal interface and enable stable electrochemical cycling with higher Coulombic efficiency. Atomic layer deposition (ALD) and molecular layer deposition (MLD) are nanoscale coating techniques that are capable of controlling the interfacial chemistry down to the atomic level [2]. Herein, we demonstrate the effectiveness of these techniques in enabling high performance Li metal anodes for next-generation battery systems. Various polymeric protective coatings are synthesized on Li metal by MLD to enable prolonged lifetime and cycling stability. Metalcones including Alucone and Zircone are explored and shown to greatly enhance the performance of Li-S and Li-O2 systems [3]. Moreover, the ability to fine tune the composition of artificial SEI layers is exemplified by combining ALD/MLD techniques to form hybrid organic/inorganic protection layers to further improve the stability of the Li metal anode. The performance of the protected Li metal anodes are optimized in various electrolyte systems to achieve long life times at relatively high current densities in symmetrical cells and full cells. Furthermore, a better understanding of the role of these organic/inorganic polymeric films are gained through advanced ex-situ and in-situ characterization techniques, providing insight into the mechanism of improved performance. These works display the advantages of ALD/MLD for precise interfacial engineering at the atomic/molecular level towards achieving high performance next-generation batteries. [1] Cheng, X.B.; Zhang, R.; Zhao, C.Z.; Zhang Q. Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review. Chem. Rev., 2017, 117(15), 10403-10473. [2] Meng, X.; Yang, X.Q.; Sun, X. Emerging applications of atomic layer deposition for lithium-ion battery studies. Adv. Mater., 2012, 24(27), 3589-3615. [3] Zhao, Y.; Goncharova, L.V.; Sun, Q.; Li, X.; Lushington, A.; Wang, B.; Li, R.; Dai, F.; Cai, M.; Sun, X. Robust Metallic Lithium Anode Protection by the Molecular Layer Deposition Technique. Small Methods, 2018, 2(5), 1700417.

Revealing and Elucidating ALD‐Derived Control of Lithium Plating Microstructure

Atomic layer deposition-strengthened lithiophilicity of ultrathin TiO2 film decorated Cu foil for stable lithium metal anode

Novel ALD Chemistry Enabled Low-Temperature Synthesis of Lithium Fluoride Coatings for Durable Lithium Anodes

Next-Generation Lithium Metal Anode Engineering Via Atomic Layer Deposition

Synergistic Surface and Bulk Engineering with Li-Riched D Ual-Phase Li-Al a Lloy a Node for Rational Regulation of L Ithium Deposition

Li-Alloy texture creates in-built Li(110) epitaxy in a thin Li-metal anode allowing high depth-of-discharge cycling in carbonate electrolyte

Constructing ultrathin TiO2 protection layers via atomic layer deposition for stable lithium metal anode cycling

Atomic Layer Deposition for Lithium‐Based Batteries

Modulating Lithium Nucleation Behavior Through Ultrathin Interfacial Layer for Superior Lithium Metal Batteries

Li–Zn Overlayer to Facilitate Uniform Lithium Deposition for Lithium Metal Batteries

Stable lithium metal anode enabled by high-dimensional lithium deposition through a functional organic substrate

Molecular-Level Engineering of Protected Li Metal Anodes for High Performance Next-Generation Batteries

Roll-To-Roll Atomic Layer Deposition of Titania Nanocoating on Thermally Stabilizing Lithium Nickel Cobalt Manganese Oxide Cathodes for Lithium Ion Batteries

Inward-growth plating of lithium driven by solid-solution based alloy phase for highly reversible lithium metal anode

Insights into dendrite suppression by alloys and the fabrication of a flexible alloy-polymer protected lithium metal anode

Lithiophilic polymer interphase anchored on laser-punched 3D holey Cu matrix enables uniform lithium nucleation leading to super-stable lithium metal anodes

Uniform Li Deposition by Regulating the Initial Nucleation Barrierviaa Simple Liquid-Metal Coating for a Dendrite-Free Li–metal Anode

(Invited) Guided Growth and Smooth Deposition of Lithium Metal Film Through Electrolyte Strategy

Improving high-temperature performance of lithium-rich cathode by roll-to-roll atomic layer deposition of titania nanocoating for lithium-ion batteries

Regulation of Dendrite-Free Li Plating via Lithiophilic Sites on Lithium-Alloy Surface

Toward real-time monitoring of lithium metal growth and dendrite formation surveillance for safe lithium metal batteries