Abstract:Fully dense ceramics with retarded grain growth can be attained effectively at relatively low temperatures using a high-pressure sintering method. However, there is a paucity of in-depth research on the densification mechanism, grain growth process, grain boundary characterization, and residual stress. Using a strong, reliable die made from a carbon-fiber-reinforced carbon (Cf/C) composite for spark plasma sintering, two kinds of commercially pure α-Al2O3 powders, with average particle sizes of 220 nm and 3 μm, were sintered at relatively low temperatures and under high pressures of up to 200 MPa. The sintering densification temperature and the starting threshold temperature of grain growth (Tsg) were determined by the applied pressure and the surface energy relative to grain size, as they were both observed to increase with grain size and to decrease with applied pressure. Densification with limited grain coarsening occurred under an applied pressure of 200 MPa at 1050 °C for the 220 nm Al2O3 powder and 1400 °C for the 3 μm Al2O3 powder. The grain boundary energy, residual stress, and dislocation density of the ceramics sintered under high pressure and low temperature were higher than those of the samples sintered without additional pressure. Plastic deformation occurring at the contact area of the adjacent particles was proved to be the dominant mechanism for sintering under high pressure, and a mathematical model based on the plasticity mechanics and close packing of equal spheres was established. Based on the mathematical model, the predicted relative density of an Al2O3 compact can reach ∼80 % via the plastic deformation mechanism, which fits well with experimental observations. The densification kinetics were investigated from the sintering parameters, i.e., the holding temperature, dwell time, and applied pressure. Diffusion, grain boundary sliding, and dislocation motion were assistant mechanisms in the final stage of sintering, as indicated by the stress exponent and the microstructural evolution. During the sintering of the 220 nm alumina at 1125 °C and 100 MPa, the deformation tends to increase defects and vacancies generation, both of which accelerate lattice diffusion and thus enhance grain growth.

Numerical modeling of low-temperature and low-pressure sintering of silver microparticles based on surface and grain boundary diffusion mechanisms

A quantitative model to understand the microflow-controlled sintering mechanism of metal particles at nanometer to micron scale

A model for the sintering of spherical particles of different sizes by solid state diffusion

Sintering mechanisms and mechanical properties of joints bonded using silver nanoparticles for electronic packaging applications

Molecular Dynamics Simulation of Sintering Densification of Multi-Scale Silver Layer

Modeling morphology evolution and densification during solid-state sintering via kinetic Monte Carlo simulation

Coupling the discrete element method and solid state diffusion equations for modeling of metallic powders sintering

Molecular dynamics simulation study of sintering mechan-ism and thermal conductivity of nano-Ag particles

Atomic Insights into the Sintering Behaviour of Ag-Cu Solid Solution Nanoparticles on Ag Substrate

Computational analysis model of intense pulsed sintering of silver nanoparticles

Thermo-electro-mechanical modeling of spark plasma sintering processes accounting for grain boundary diffusion and surface diffusion

Modeling and Simulation of Sintering Process Across Scales

Molecular dynamics simulations of nanoparticle sintering in additive nanomanufacturing: insights from sintering mechanisms

Molecular dynamics simulations of solid-state sintering in Fe35Ni alloy: understanding the process at the atomic scale

Mechanism of Low Temperature Sintering-Bonding Through In-Situ Formation of Silver Nanoparticles Using Silver Oxide Microparticles

Effect of heating rate on bonding strength of pressure-free sintered nanosilver joint

Sintering mechanism between silver nanoparticles and SiC/Cu plates: A molecular dynamics simulation

Surface Self-Diffusion Induced Sintering of Nanoparticles

2D Aggregate Evolution in Sintering Due to Multiple Diffusion Approaches

Multi-particle Molecular Dynamics Simulation: Shell Thickness Effects on Sintering Process of Cu-Ag Core-Shell Nanoparticles

Densification mechanism and microstructure characteristics of nano- and micro- crystalline alumina by high-pressure and low temperature sintering