Abstract:Shape memory alloys based on the Ni–Ti system derive their versatile properties from the non-stoichiometric intermetallic compound NiTi. The transformation temperature associated with its shape memory effect is dependent on composition, which can be controlled by minor additions of a third element like iron. This work considers the formation of various intermetallic compounds and the evolution of phases during the sintering of ternary Ni–Ti–Fe powder compacts. Elemental powder mixtures of nickel, titanium and iron were prepared by adding 0–20 at.% Fe to equiatomic Ni–Ti. The powders were compacted into discs and sintered by heating to 1200 °C in a differential scanning calorimeter. In separate experiments, heating was interrupted to identify the phases present in the partially sintered samples at various temperatures. The microstructures of the sintered samples were characterized using scanning electron microscopy. The distribution of nickel, titanium and iron in the samples was studied with EDS mapping and the phases present were identified using XRD. In the equiatomic Ni–Ti powder compact, NiTi 2 , NiTi and Ni 3 Ti were formed in the solid state (< 942 °C) through diffusion. At 942 °C a strong reaction between the remaining titanium and NiTi 2 takes place, leading to the formation of a liquid. At 1120 °C, NiTi and Ni 3 Ti combine to form a liquid. These reactions are affected by the addition of iron to the powder mixture. The results show that at 20 at.% iron in the ternary compact, the first reaction occurred at 999 °C, instead of 942 °C for the binary composition and iron did not form any compound with nickel or titanium. Instead, the iron could replace nickel in NiTi 2 and in NiTi, forming (Fe, Ni)Ti 2 and (Fe,Ni)Ti. This leads to more Ni 3 Ti formation and explains why the reaction at 1120 °C is more prominent at high iron contents. A linear dependence on the iron content in the sample was also observed for the onset temperatures for two split exothermic peaks in the DSC curves. The results also suggest that the temperatures associated with the β-Ti + (Fe, Ni)Ti 2 → L and (Fe, Ni)Ti 2 → (Fe,Ni)Ti + L reactions depend on the ratio of iron to nickel in (Fe, Ni)Ti 2 .

Molecular dynamics simulations of solid-state sintering in Fe35Ni alloy: understanding the process at the atomic scale

Evolution from Amorphous to Nanocrystalline and Corresponding Magnetic Properties of Fe-Si-B-Cu-Nb Alloys by Melt Spinning and Spark Plasma Sintering

Molecular dynamics simulations of nanoparticle sintering in additive nanomanufacturing: insights from sintering mechanisms

Nickel Nanoparticles: Insights into Sintering Dynamics

Exploring mass transfer mechanisms in sintering processes through molecular dynamics simulation

Sintering Behavior and Activation Energy of Fe2O3 Nanoparticles: A Molecular Dynamics Research

Sintering behavior and activation energy calculation of nanoparticulate Fe3O4: a molecular dynamics simulation

A molecular simulation study on the sintering mechanism of TiO2

Surface Self-Diffusion Induced Sintering of Nanoparticles

Modeling and Simulation of Sintering Process Across Scales

Modeling morphology evolution and densification during solid-state sintering via kinetic Monte Carlo simulation

Study on sintering mechanism for extrusion-based additive manufacturing of stainless steel through molecular dynamics simulation

Competition between surficial and volumetric diffusion in sintering TiO2 polymorphs by molecular dynamics simulation

Understanding mono- and bi-metallic Au and Ni nanoparticle responses to fast heating

Advances in Nanoparticle Sintering Simulation: Multiple Layer Sintering and Sintering Subject to a Heat Gradient

Effect of sintering temperature on structural, elastic, and hyperfine features of nickel ferrite nanoparticles

Molecular dynamics simulations of nanoparticle sintering in additive nanomanufacturing: The role of particle size, misorientation angle, material type, and temperature

Sintering-Induced Phase Transformation of Nanoparticles: A Molecular Dynamics Study

Unravelling densification during sintering by multiscale modelling of grain motion

Sintering studies on Ni–Ti–Fe elemental powder mixtures using differential scanning calorimetry

Atomic level simulation of amorphous/nanocrystalline transition behavior in the Fe based amorphous alloys