Abstract:Metal/composite hybrid structures, which combine low-density composites with low-cost metallic materials, exhibit considerable potential to provide cost-effective energy-absorbing devices for automotive applications. This study aimed to explore crashworthiness characteristics of aluminum/carbon fiber reinforced plastic (CFRP) hybrid tubes, experimentally and numerically, subjected to three different loading angles by comparing with the aluminum alone and CFRP alone tubes, in which the deformation patterns and several key indicators related to the crashworthiness of these structures were assessed. The experiments revealed that the CFRP tube has the highest SEA under the axial (37.82 J/g) and 15° loading (30.03 J/g) angles of all the configurations concerned; while the hybrid tube showed the greatest energy absorption. It was found that the energy absorption capacity of all specimens reduced in different extent with increasing loading angle. Specifically, with the loading angle up to 15°, SEA of the hybrid tube decreased by 10.0% from that with the axial loading; whereas SEA of the CFRP tube decreased by 20.6% from that of the axial loading. It means that the hybrid tube was more capable to mitigate the effects of oblique load on energy absorption capacity in comparison with the net CFRP tube. To better understand the crashing mechanism, numerical models were created and validated by the experimental data. A parametric study was further performed to investigate the effects of loading angle, thickness of aluminum layer, stacking sequence and thickness of CFRP layers on crashworthiness of these structures. It was found that the number of CFRP layers is more important to energy absorption of the hybrid tube. For the pure CFRP tube, there is significant difference between the axial and oblique loading conditions, making it disadvantageous to be a proper crashworthy structure. Whereas for the hybrid tube, the effect of loading angle on energy absorption capacity is considerably mitigated; and consequently, the hybrid configuration offers a higher energy absorption capacity for meeting the crashworthiness requirements accommodating complex impacting angles.

Experimental investigation into the bending energy absorption of hybrid aluminum/high strength and mild steel thin-walled sections joined by clinching

Steel-aluminum Plastic Clinching of an Inclined Wall Die

Experimental and numerical investigation on the crashworthiness performance of double hat‐section Al‐CFRP beam subjected to quasi‐static bending test

Experimental and numerical studies on bending characteristics of woven CFRP reinforced aluminum thin-walled automotive structures

Investigation Of Flat Clinching Process Combined With Material Forming Technology For Aluminum Alloy

Investigation on Mechanical Behavior of Clinched Joint Using Extensible and Flat Die Techniques

Steel‐aluminum clinched joints mechanical properties and strength prediction under different geometric parameters

Experimental Investigation On The Joining Of Aluminum Alloy Sheets Using Improved Clinching Process

Bending characteristics of partially reinforced aluminum/CFRP hybrid hat‐section beam structures with an adhesively bonded joint: An experimental, numerical, and analytical study

Energy absorption of metal, composite and metal/composite hybrid structures under oblique crushing loading

Experimental Investigation of the Mechanical Reshaping Process for Joining Aluminum Alloy Sheets with Different Thicknesses

A comparative study on the energy absorption mechanism of aluminum/CFRP hybrid beams under quasi-static and dynamic bending

Experimental Research on the Compressed Joints with Different Geometrical Parameters

Mechanical properties of an innovative shear-clinching technology for ultra-high-strength steel and aluminium in lightweight car body structures

Mechanical Performance Evaluation of Multi-Point Clinch–Adhesive Joints of Aluminum Alloy A5052-H34 and High-Strength Steel JSC780

Comparative Investigation of Three Different Reforming Processes for Clinched Joint to Increase Joining Strength

Composite Hat Structure Design for Vehicle Safety: Potential Application to B-Pillar and Door Intrusion Beam

Research on joint strength and energy absorption of CFRP and Al sheets bonded-FDS hybrid joining

Research on a single-point butt clinching process with various forming forces

Experimental investigation on failure mechanisms of hybrid steel/GFRP hat‐shaped beams under bending loading

Energy absorption study of a new reinforced top-hat section beam under flexural loading