Abstract:This study presents experimental and numerical investigations on the effects of composite ply angle, thickness and number of layers on energy absorption behavior of adhesively bonded carbon fiber-reinforced plastic/aluminum hybrid structure under quasi-static axial loading. This paper aims to use the advantages of adhesive bonding for the local strengthening of a square shaped aluminum energy absorber by composite and as a result achieving desirable energy absorption behavior prior to failure in the connection and without heterogeneous deformation of the structure while reducing the weight of the structure and usage of material and at the same time obtaining favorable results compared to the traditional ways like reinforcing the aluminum structure with composite globally. For this purpose, two models were made and analyzed; one reinforced with four L-shaped composites adhesively bonded using Araldite 2015 to four outside corners of the aluminum square and the other reinforced locally to four corners from within the square. Finite element model was developed for analysis of these hybrid structures. Five different ply angles for composite and multiple number of composite layers varied from 2 to 8 layers under the same and different thicknesses were investigated. Moreover an alpha factor has been determined to measure the importance of local reinforement of the square shape aluminum energy absorber by L-shaped composites. The results showed that compared to aluminum and aluminum with global composite reinforcement energy absorbers, due to the adhesive connection between aluminum and composite in the locally reinforced CFRP/aluminum specimen, the composite had better energy absorption by following the collapse pattern of aluminum and creating a continuous collapse and failure modes. The results indicated good coordination and agreement between the simulated models and the experimental tests. The findings from this experiment demonstrates significant potential for local reinforcement of structures employing adhesives. Utilizing such connections and the ability to strengthen specific areas based on arbitrary geometry and strengthening location could offer substantial opportunities in constructing lightweight structures with high energy absorption across diverse applications.

Energy absorption study of a new reinforced top-hat section beam under flexural loading

RESEARCH ON FLEXURAL PERFORMANCE OF DOUBLE-STEEL REINFORCED CONCRETE BEAM

Experimental and numerical investigation on the crashworthiness performance of double hat‐section Al‐CFRP beam subjected to quasi‐static bending test

Bending characteristics of partially reinforced aluminum/CFRP hybrid hat‐section beam structures with an adhesively bonded joint: An experimental, numerical, and analytical study

Experimental investigation into the bending energy absorption of hybrid aluminum/high strength and mild steel thin-walled sections joined by clinching

Fatigue Performance of Prefabricated Composite T‐beams under Cyclic Overloading: an Experimental Study

Flexural behavior analysis of double honeycomb steel composite encased concrete beams: An integrated experimental and finite element study

A Design Proposal for Concrete Cover Separation in Beams Strengthened by Various Externally Bonded Tension Reinforcements

The effect of different layouts in internal and external stiffeners on the energy absorption of thin-walled structures with square sections

Bending response and energy absorption of sandwich beams with combined reinforced auxetic honeycomb core

A Novel Rectangular-Section Combined Beam of Welded Thin-Walled H-Shape Steel/Camphor Pine Wood: The Bending Performance Study

Cross-section parameterisation and optimisation of double-hat beams under dynamic three-point bending

A numerical study on bending behavior of sandwich beam with novel auxetic honeycomb core

Flexural behavior of cold-formed steel I-beams strengthened in the web with different materials

Energy dissipation theory performance of different layup patterns CFRP/aluminium alloy hat-shaped hybrid beams under three-point bending conditions

Composite Hat Structure Design for Vehicle Safety: Potential Application to B-Pillar and Door Intrusion Beam

Behavior of I-section Steel Beam Welding Reinforced While under Load

A comparative study on the energy absorption mechanism of aluminum/CFRP hybrid beams under quasi-static and dynamic bending

Local reinforcement of adhesively bonded square shape aluminum energy absorber with CFRP under quasi-static axial loading: an experimental and numerical study

A Comprehensive Study on the Effect of Reinforcing Methods on the Flexural Behaviour of Concrete-RUHTCC Composite Beams

Experimental Investigation on Bending Behavior of Existing RC Beam Retrofitted with SMA-ECC Composites Materials