Abstract:High-temperature proton exchange membrane fuel cells based on phosphoric acid-doped polybenzimidazole membranes are a technology characterized by simplified construction and operation along with possible integration with, e.g., methanol reformers. Significant progress has been achieved in terms of key materials, components and systems. This review is devoted to updating new insights into the fundamental understanding and technological deployment of this technology. Polymers are synthetically modified with basic functionalities, and membranes are improved through cross-linking and inorganic–organic hybridization. New insights into phosphoric acid along with its interactions with basic polymers, metal catalysts and carbon-based supports are recapped. Recognition of parasitic acid migration raises acid retention issues at high current densities. Acid loss via evaporation is estimated with respect to the acid inventory of membrane electrode assembly. Acid adsorption on platinum surfaces can be alleviated for platinum alloys and non-precious metal catalysts. Binders have been considered a key to the establishment of the triple-phase boundary, while recent development of binderless electrodes opens new avenues toward low Pt loadings. Often ignored microporous layers and water impacts are also discussed. Of special concern are durability issues including acid loss, platinum sintering and carbon corrosion, the latter being critical during start/stop cycling with mitigation measures proposed. Long-term durability has been demonstrated with a voltage degradation rate of less than 1 μV h−1 under steady-state tests at 160 °C, while challenges remain at higher temperatures, current densities or reactant stoichiometries, particularly during dynamic operation with thermal, load or start/stop cycling.Graphic abstract

Radiation-Grafted Polymer Electrolyte Membranes for Fuel Cells

A review of radiation-grafted polymer electrolyte membranes for alkaline polymer electrolyte membrane fuel cells

Radiation-grafted materials for energy conversion and energy storage applications

Radiation-Grafted Polymer Electrolyte Membranes for Water Electrolysis Cells: Evaluation of Key Membrane Properties

Preparation of a Novel Proton Exchange Membrane Using Radiation Grafted ETFE Film for Fuel Cell

Solid polymer electrolyte membranes for fuel cell applications—a review

Metal-Salt Enhanced Grafting of Vinylpyridine and Vinylimidazole Monomer Combinations in Radiation Grafted Membranes for High-Temperature PEM Fuel Cells

Study on the mechanism of graft polymerization and sulfonation of proton exchange membranes for fuel cell

Quantitative analysis of proton exchange membrane prepared by radiation-induced grafting on ultra-thin FEP film

Polyethylene-based radiation grafted anion-exchange membranes for alkaline fuel cells

Branched Polymer Materials as Proton Exchange Membranes for Fuel Cell Applications

A review of polymer–nanocomposite electrolyte membranes for fuel cell application

Current Challenges and Perspectives of Polymer Electrolyte Membranes

Polymer Membranes for Fuel Cells

Proton Exchange Membranes Prepared Via Atom Transfer Radical Polymerization for Proton Exchange Membrane Fuel Cell: Recent Advances and Perspectives

Grafted polymer electrolyte membrane for direct methanol fuel cells

Synthesis of Fluorinated Polymer Electrolyte Membranes by Radiation Grafting and Atom Transfer Radical Polymerization Techniques

Polymer electrolyte membrane fuel cell flow field designs and approaches for performance enhancement

Preparation and characterization of chemically stable polymer electrolyte membranes by radiation-induced graft copolymerization of four monomers into ETFE films

Preparation of polymer electrolyte membranes for lithium batteries by radiation-induced graft copolymerization

Polybenzimidazole-Based High-Temperature Polymer Electrolyte Membrane Fuel Cells: New Insights and Recent Progress