Abstract:Key messageAn efficient use of thermal treatment of wood requires a depth understanding of the chemical modifications induced. This is a prerequisite to avoid problems of process control, and to provide high quality treated wood with accurately assessed properties to the market. Properties and structural anatomy of thermally modified woods are slightly different than un-processed woods from a same wood species. So it is necessary to create or adapt new analytical methods to control their quality.ContextHeat treatment as a wood modification process is based on chemical degradation of wood polymer by heat transfer. It improves mainly the resistance of wood to decay and provides dimensional stability. These improvements, which come at the expense of a weakening of mechanical properties, have been extensively studied. Since a decade, researches focused mainly on the understanding of wood thermal degradation, on modelling, on quality prediction and quality control.AimsWe aimed at reviewing the recent advances about (i) the analytical methods used to control thermal treatment; (ii) the effects on wood decay resistance and (iii) the advantages and drawbacks of a potential industrial use of wood heating.MethodsWe carried out a literature review of the main industrial methods used to evaluate the conferred wood properties, by thermal treatment. We used papers and reports published between 1970 and 2015, identified in the web of science data base..ResultsApproximately 100 papers mostly published after 2000 were retrieved. They concentrated on: (i) wood mass loss due to thermal degradation determination, (ii) spectroscopic analyses of wood properties, (iii) colour measurements, (iv) chemical composition, (v) non-destructive mechanical assessments and (vi) use of industrial data.ConclusionsOne of most interesting property of heat-treated wood remains its decay resistance. Durability test with modified wood in laboratory are expensive and time-consuming. This review displays data from different analytical methods, such as spectroscopy, thermogravimetry, chemical analyses or mechanical tests that have the potential to be valuable indicators to assess the durability of heat treated wood at industrial scale. However, each method has its limits and drawbacks, such as the required investment for the equipment, reliability and accuracy of the results and ease of use at industrial scale.

Effect of hemp oil impregnation and thermal modification on European beech wood properties

Comparison of physical and mechanical properties of Paulownia tomentosa and Pinus koraiensis wood heat-treated in oil and air

Chemical changes in thermally modified, acetylated and melamine formaldehyde resin impregnated beech wood

Effect of oil impregnation on water repellency, dimensional stability and mold susceptibility of thermally modified European aspen and downy birch wood

Oil Heat Treatment of Wood—A Comprehensive Analysis of Physical, Chemical, and Mechanical Modifications

Determination of changes in the mechanical and color properties of some wood species treated with shellac

Effect of a Combination of Moderate-Temperature Heat Treatment and Subsequent Wax Impregnation on Wood Hygroscopicity, Dimensional Stability, and Mechanical Properties

Thermal and chemical modification of wood – a combined approach for exclusive, high-demanding performance products

Impact of thermal modification on color and chemical changes of spruce and oak wood

Mild hydrothermal modification of beech wood (Zelkova schneideriana Hand-Mzt): its physical, structural, and mechanical properties

Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood

Wood modification by heat treatment: A review

The Weathering of the Beech and Spruce Wood Impregnated with Pigmented Linseed Oil

The effect of hydrothermal treatment on bond shear strength of beech wood

Swelling kinetics of thermally modified wood

Impact of thermal modification on color and chemical changes of African padauk, merbau, mahogany, and iroko wood species

Control of wood thermal treatment and its effects on decay resistance: a review

Comparison of the chemical and micromechanical properties of Larix spp. after eco-friendly heat treatments measured by in situ nanoindentation

Modification of wood via biochar particle impregnation

Effect of Thermal Modification on the Nano-Mechanical Properties of the Wood Cell Wall and Waterborne Polyacrylic Coating

The effect of oil heat treatment on biological, mechanical and physical properties of bamboo