Abstract:This study describes the effect of heat treatment on some physical, chemical, and mechanical properties of Eucalyptus Camaldulensis (EC) wood at different temperatures and treatment times (200 °C-260 °C for 5, 60, and 90 min). The evaluation of hygroscopic properties was determined by relative humidity, mass loss, dimensional stability tests, and density. The results showed that the heat treatment leads to an increase in mass loss of 5.2 %-11.9 % at 200 °C. The density changed significantly for this studied species as well as the dimensional stabilization. Chemical changes in wood structure were assessed by Fourier Transform Infrared Spectroscopy.To verify the validity of the superposition "Mass loss-Density-water absorption" on the mechanical properties (modulus of elasticity (MOE) and modulus of rupture (MOR)) during heat treatment, we have developed a mathematical model based on Multiple Linear Regression (MLR), in order to establish a relationship between the independent parameters and the dependent parameters (MOE and MOR). The evaluation of the quality of the models developed was based on several statistical tools, namely R = 0.99, R2 = 0.99, R2adj = 0.98, and F = 132.33. The results demonstrated that elaborate models of mechanical properties have a high predictive capacity (MOR and MOE). The wood's carbohydrates (particularly hemicelluloses) are then degraded during the heat treatment. The % of carbon increases from 47.8 to 49.8 %, which is proportional to mass loss, while the % of oxygen decreases by 46.1 %, which is inversely proportional to mass loss. Furthermore, FTIR analysis revealed that the effect of heat-treated wood chemical changes was related to the hydroxyl OH function of cellulose, functional groups, and aromatic system of lignin. In conclusion, the results demonstrated that at 200 °C, heat treatment caused a 5.2-11.9 % increase in mass loss; dimensional stability and density underwent considerable changes. FTIR spectroscopy confirmed the chemical changes in the wood structure during heat treatment. Furthermore, the "MLR" mathematical model showed that density contributed to the increase in MOR and MOE properties, while water absorption and mass loss contributed to the decrease in MOR and MOE properties. Finally, the % of oxygen decreased by 46.1 %, which is inversely proportional to the loss of mass, and the % of carbon increased from 47.8 % to 49.8 %, which is proportional to the loss of mass.

Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood

Comparison of physical and mechanical properties of Paulownia tomentosa and Pinus koraiensis wood heat-treated in oil and air

High-Pressure Treatment of Chinese Fir Wood: Effect on Density, Mechanical Properties, Humidity-Related Moisture Migration, and Dimensional Stability

High-Pressure Treatment Effects on Density Profile, Surface Roughness, Hardness, and Abrasion Resistance of Paulownia Wood Boards

Wood modification by heat treatment: A review

How thermal treatment affects the chemical composition and the physical, mechanical and swelling properties of Scots pine juvenile and mature wood

Influence of thermo-vacuum treatment on thermal degradation of various wood species

Effect of extractives on wood color of heat treated Pinus radiata and Eucalyptus pellita

Extractive composition and summative chemical analysis of thermally treated eucalypt wood

Wood Properties Characterisation of Thermo-Hydro Mechanical Treated Plantation and Native Tasmanian Timber Species

Effects of hydrothermal processing on the cellulosic fraction of Eucalyptus globulus wood

Comparison of the chemical and micromechanical properties of Larix spp. after eco-friendly heat treatments measured by in situ nanoindentation

Mechanical properties of industrial heat-treated wood

Effect of heat treatment on physical, mechanical and chemical properties of angelim wood

Investigation of Roughness and Adhesion Strength Properties of Pine and Poplar Wood Heat Treated in Air and under Vacuum after Artificial Aging

Study of the effect of heat temperature on the chemical changes and hygroscopicity of eucalyptus wood by FT-IR and prediction of mechanical properties by the MLR regression method

Effect of a Combination of Moderate-Temperature Heat Treatment and Subsequent Wax Impregnation on Wood Hygroscopicity, Dimensional Stability, and Mechanical Properties

Effects of thermal treatment on air-dried density, color change, average surface roughness, and sound absorption capacity of Scots pine

Effects of different heat treatment media on odorous constituents, chemical decomposition and mechanical properties of two hardwoods

Effect of superheated steam pressure on the physical and mechanical properties of sandwich-densified wood