Abstract:In this study, to improve the structural applications of glued laminated timber (glulam) in high RH environment according to its relatively lower MOE, fast-growing poplar laminae with a thickness of 35 mm were thermally treated at 200 degrees C for 3.5 h. The effects of thermal treatment and RH in the surrounding environment on laminae strength class was conducted. Afterward, 12 full-scale same-grade composition glulam beams made out of untreated and thermally treated poplar laminae were prepared. The four-point bending tests were conducted to reveal the effects of laminae thermal treatment and RH in the surrounding environment on flexural properties of glulam beams with a span-depth ratio of 18. The results showed that the strength class of fast-growing poplar laminae was negatively related to RH in the surrounding condition, and thermal treatment can contribute to the increase in strength class. In 90% RH, strength class increased from untreated laminae M(E)7 to the heat-treated laminae M(E)10, according the China standard. The relationship between bending properties of glulam beams and RH in the surrounding environment was negatively correlated, as well as thermal treatment, whereas MOE was improved significantly after thermally pretreated, especially in high RH. In 90% RH, MOE of glulam beams made of thermally pretreated laminae was 29.57% higher than the untreated beams with an MOR reduction of 8.82%. The results of characteristic load-deformation curves, characteristic load-strain curves, average extreme fiber strain, and the failure mode can support each other in this study. Industrial thermal treatment technology to laminae improved the MOE of glulam beams significantly in high RH with a reduction in MOR, and glulam beam made out of thermally treated fast-growing poplar laminae can be used in construction, but need checking in MOR or be used for a limited range of structural elements.

Mechanical properties of industrial heat-treated wood

Effects of High-Pressure Treatment on Poplar Wood: Density Profile, Mechanical Properties, Strength Potential Index, and Microstructure

High-Pressure Treatment of Chinese Fir Wood: Effect on Density, Mechanical Properties, Humidity-Related Moisture Migration, and Dimensional Stability

Comparison of physical and mechanical properties of Paulownia tomentosa and Pinus koraiensis wood heat-treated in oil and air

High-Pressure Treatment Effects on Density Profile, Surface Roughness, Hardness, and Abrasion Resistance of Paulownia Wood Boards

Delayed Elastic Strain and Set-Recovery Evaluation in High-Pressure Densified Hybrid Poplar Wood – New Assessment Considerations

Physical, mechanical, and thermal properties of heat-treated poplar and beech wood

An Experimental Study of Flexural Behavior of Glulam Beams Made out of Thermally Treated Fast-Growing Poplar Laminae.

Effects of thermal treatment on the mechanical properties of larch (Larix gmelinii) and red oak (Quercus rubra) wood cell walls via nanoindentation

Comparison of the chemical and micromechanical properties of Larix spp. after eco-friendly heat treatments measured by in situ nanoindentation

Mechanical Properties and Dimensional Stability of Poplar Wood Modified by Pre-Compression and Post-Vacuum-Thermo Treatments

Integrated approach for improving mechanical and high-temperature properties of fast-growing poplar wood using lignin-controlled treatment combined with densification

How thermal treatment affects the chemical composition and the physical, mechanical and swelling properties of Scots pine juvenile and mature wood

Intenzitet toplinske modifikacije topolovine. Dio 2

Molecular-level characterization of changes in the mechanical properties of wood in response to thermal treatment

Preparation and Characterization of Heat-Treated Douglas Fir Wood with Core–Shell Structure

Effect of a Combination of Moderate-Temperature Heat Treatment and Subsequent Wax Impregnation on Wood Hygroscopicity, Dimensional Stability, and Mechanical Properties

Response relationships between the color parameters and chemical compositions of heat-treated wood

Effect of Thermal Modification on the Nano-Mechanical Properties of the Wood Cell Wall and Waterborne Polyacrylic Coating

Mechanical Behavior and Natural Durability of Fast-Growing Poplar Wood Modified by Chemical Treatment

Effects of the combination of phenolic-resin impregnation and heat treatment on physical, mechanical and decay resistance of Taxodium hybrid "Zhongshanshan" wood