Abstract:In this study, a phenol–formaldehyde resin–montmorillonite intercalation composite solution was used as a modifier to treat Chinese fir via impregnation and compression. The basic characteristics and wettability of the PF (phenol–formaldehyde)–montmorillonite impregnation solution were analyzed. The effects of the solid content of PF, the quantity of montmorillonite, and the impregnation time on the impregnation weight gain of Chinese fir were studied through orthogonal experiments. The results showed that when the amount of montmorillonite was 1%, the wettability of the PF–montmorillonite impregnation solution performed the best, the curing time was short, and the curing strength was high. The optimal impregnation process consists of a PF solid content of 25%, an impregnation time of 120 min, and a montmorillonite ratio of 1%. Under these conditions, the modified Chinese fir was prepared via hot pressing. The effects of the addition of montmorillonite and different levels of compressibility on the physical and mechanical properties of modified wood were studied. The physical and mechanical properties were found to be better when the compression ratio was 33%: the density increased from 0.33 g/cm3 to 0.58 g/cm3; the surface hardness increased from 33.6 HD to 70.9 HD; the static bending strength increased from 60.4 MPa to 98.7 MPa; and the elastic modulus increased from 6 390 MPa to 11 498 MPa. After 30 days of release, the compression rebound rate was 3.97%. Meanwhile, the micromorphology and heat resistance of the impregnated compressed Chinese fir showed that the PF–montmorillonite impregnation solution entered into the cell cavity and intercellular space of the Chinese fir and formed a good composite, thus improving the water resistance, heat resistance, and physical and mechanical properties.

Effects of the combination of phenolic-resin impregnation and heat treatment on physical, mechanical and decay resistance of Taxodium hybrid "Zhongshanshan" wood

High-Pressure Treatment of Chinese Fir Wood: Effect on Density, Mechanical Properties, Humidity-Related Moisture Migration, and Dimensional Stability

Decay resistance and mechanical strength of poplar wood treated after injection treatment to living trees using ammoniacal copper quaternary/carbon dots

Effect of a Combination of Moderate-Temperature Heat Treatment and Subsequent Wax Impregnation on Wood Hygroscopicity, Dimensional Stability, and Mechanical Properties

Effects of different incising pretreatments in improving permeability in two refractory wood species

Effects of tannin acid impregnated pretreatment on dimensional stability and chemical composition of heat-treated Chinese fir

Decay and Termite Resistance of Wood Modified by High-Temperature Vapour-Phase Acetylation (HTVPA), a Simultaneous Acetylation and Heat Treatment Modification Process

Mechanical Behavior and Natural Durability of Fast-Growing Poplar Wood Modified by Chemical Treatment

Preparation and Characterization of Heat-Treated Douglas Fir Wood with Core–Shell Structure

Comparative studies on the durability and moisture performance of wood modified with cyclic N-methylol and N-methyl compounds

Study of Mechanical Performance and Gluability of Modified Fast-growing Poplar Wood

Mechanical properties of industrial heat-treated wood

Improvement of decorative texture effects, thermal stability, and mechanical properties of Pinus massoniana using a combined dyeing and superhydrophobic modification method

INVESTIGATION OF DECAY RESISTANCE OF ALKALINE COPPER, UREA-FORMALDEHYDE, AND PHENOL -FORMALDEHYDE RESINS

Combining boron acid and heat treatment for enhanced durability of Cunninghamia konishii plantation wood

Structural Characterization of Steam-Heat Treated Tectona Grandis Wood Analyzed by FT-IR and 2D-IR Correlation Spectroscopy

Study on Phenol–Formaldehyde Resin–Montmorillonite Impregnation and Compression Modification of Chinese Fir

Wood modification with phenol urea formaldehyde (PUF) resin: the influence of wood species selection on the dimensional stability

Comparison of the chemical and micromechanical properties of Larix spp. after eco-friendly heat treatments measured by in situ nanoindentation

Effect of superheated steam pressure on the physical and mechanical properties of sandwich-densified wood

Heat treatment induces chemical changes and silica sol penetration in wood for properties improvement: hydrophobicity, thermal stability, and surface hardness