Abstract:The Super-Critical Water-cooled Reactor (SCWR) has been designed and investigated because of its high thermal efficiency and plant simplification. There are some advantages including the use of a single phase coolant with high enthalpy but there are numerous potential problems, particularly with materials. As the operating temperature of supercritical water reactor will be between 280°C and 620°C with a pressure of 25MPa, the selection of materials is difficult and important. Austenitic stainless steels were selected for possible use in supercritical water systems because of their corrosion resistance and radiation resistance. The PNC1520 austenitic stainless steel developed by Japan Atomic Energy Agency (JAEA) as a nuclear fuel cladding material for a Na-cooled fast breeder reactor. The corrosion data of PNC1520 in supercritical water (SCW) is required but does not exist. The purpose of the present study is to research the corrosion properties for PNC1520 austenitic stainless steel in supercritical water. The supercritical water corrosion test was performed for the standard PNC1520 (1520S) and the Ti-additional type of PNC1520 (1520Ti) by using a supercritical water autoclave. Corrosion tests on the austenitic 1520S and 1520Ti steels in supercritical water were performed at 400, 500 and 600°C with exposures up to 1000h. The amount of weight gain, weight loss and weight of scale were evaluated after the corrosion test in supercritical water for both austenitic steels. After 1000h corrosion test performed, the weight gains of both austenitic stainless steels were less than 2 g/m2 at 400°C and 500°C . But both weight gain and weight loss of 1520Ti were larger than those of 1520S at 600°C . By increasing the temperature to 600°C, the surface of 1520Ti was covered with magnetite formed in supercritical water and dissolution of the steel alloying elements has been observed. In view of corrosion, 1520S may have larger possibility than 1520Ti to adopt a supercritical water reactor core fuel cladding.

Study of the Influence of Microstructure and Intergranular Carbides on the Oxidation Behavior of a Nickel Base Alloy 690 TT in Supercritical Water Nuclear Reactor Conditions

Microstructural Study on the Stress Corrosion Cracking of Alloy 690 in Simulated Pressurized Water Reactor Primary Environment

Corrosion Behavior of Alloy 690 in Aerated Supercritical Water

Research on the Carbide Precipitation and Chromium Depletion in the Grain Boundary of Alloy 690 Containing Different Contents of Nitrogen

Effect of Intergranular Carbides on the Cracking Behavior of Cold Worked Alloy 690 in Subcritical and Supercritical Water

On the role of intergranular nanocavities in long-term stress corrosion cracking of Alloy 690

Revealing the superior oxidation resistance of alloy 690 in deaerated supercritical water at 600 °C through advanced characterization

Effects of Nitrogen Addition on Microstructure and Grain Boundary Microchemistry of Inconel Alloy 690

Corrosion Behaviour of Nanocrystallines Alloy 690 at High-Temperature and High-Pressure in Simulated PWR Secondary Environment

Insights into the stress corrosion cracking of solution annealed alloy 690 in simulated pressurized water reactor primary water under dynamic straining

The Oxidation of Alloy 690 in Simulated Pressurized Water Reactor Primary Water

CORROSION BEHAVIOR OF NUCLEAR GRADE ALLOYS 690 AND 800 IN SIMULATED HIGH TEMPERATURE AND HIGH PRESSURE PRIMARY WATER OF PRESSURIZED WATER REACTOR

Short-time Oxidation of Alloy 690 in High-temperature and High-pressure Steam and Water

Quantitatively evaluating the contribution of intergranular carbides, Cr-depleted zone, and grain boundary to intergranular stress corrosion cracking of Alloy 600 in a simulated boiling water reactors environment with high oxygen concentrations

General corrosion properties of modified PNC1520 austenitic stainless steel in supercritical water as a fuel cladding candidate material for supercritical water reactor

XPS study of Ni‐base alloys oxide films formed in primary conditions of pressurized water reactor

Characteristics of Oxidation and Oxygen Penetration of Alloy 690 in 600 °C Aerated Supercritical Water

Trans-twins Stress Corrosion Cracking Behaviors of Alloy 690TT in Lead-Containing Caustic Solution at 330°C

Strain Rate Dependence of the Effect of Intergranular Carbides on the Resistance to Stress Corrosion Cracking Initiation of Alloy 690 in Simulated Pwr Primary Water

Electrochemical corrosion behaviour of Alloy 690 in simulated PWR high temperature aqueous environments

Comparison and mechanism research of corrosion behavior of materials used in supercritical water-cooled reactors