Abstract:A protocol of producing multiple polymeric masters from an original glass master mold has been developed, which enables the production of multiple poly(dimethylsiloxane) (PDMS)-based microfluidic devices in a low-cost and efficient manner. Standard wet-etching techniques were used to fabricate an original glass master with negative features, from which more than 50 polymethylmethacrylate (PMMA) positive replica masters were rapidly created using the thermal printing technique. The time to replicate each PMMA master was as short as 20 min. The PMMA replica masters have excellent structural features and could be used to cast PDMS devices for many times. An integration geometry designed for laser-induced fluorescence (LIF) detection, which contains normal deep microfluidic channels and a much deeper optical fiber channel, was successfully transferred into PDMS devices. The positive relief on seven PMMA replica masters is replicated with regard to the negative original glass master, with a depth average variation of 0.89% for 26 mu m deep microfluidic channels and 1.16% for the 90 mu m deep fiber channel. The imprinted positive relief in PMMA from master-to-master is reproducible with relative standard deviations (RSDs) of 1.06% for the maximum width and 0.46% for depth in terms of the separation channel. The PDMS devices fabricated from the PMMA replica masters were characterized and applied to the separation of a fluorescein isothiocyanate (FITC)-labeled epinephrine sample.

Low Cost and Simple PMMA Nozzle Fabrication by Laser Cutting and PDMS Curing Bonding

A novel hybrid patterning technique for polymer PDMS micro and nanoscale nozzle by double casting

An Economic and Concise Method to Solve Nozzle Clogging Issue During Electro Hydrodynamic Printing

Fabrication of 1-d nanochannels on PMMA substrate by photoresist-free uv lithography and UV-assisted bonding under low temperature

Fabrication of Fluidic Chips with 1-D Nanochannels on PMMA Substrates by Photoresist-Free UV-lithography and UV-assisted Low-Temperature Bonding

Polymer nano nozzle fabricated by nanoscale electrohydrodynamic jet printing for high-resolution printing of low-viscosity inks

Fabrication of Poly(dimethylsiloxane) Microfluidic System Based on Masters Directly Printed with an Office Laser Printer.

A simple and cost-effective method for fabrication of integrated electronic-microfluidic devices using a laser-patterned PDMS layer

Fabrication And Performance Analysis Of Pmma Substrate Diffuser/Nozzle Micro-Pump By Cnc Milling Machine

Micro channel fabrication in PMMA substrates using CO2 laser and sacrificial mask process

A Non-Photolithography Fabrication For A Microfluidic Chip Based On Pmma Polymer

Rapid fabrication of microdevices by controlling the PDMS curing conditions during replication of a laser-prototyped mould

A Polymeric Master Replication Technology for Mass Fabrication of Poly(dimethylsiloxane) Microfluidic Devices.

A novel method for fabricating polydimethylsiloxane microfluidic chip master molds

Fabrication of a Polymer Nano Nozzle for Electrohydrodynamic Small-Molecule Solvent Inkjet Printing

Rapid Fabrication of Plastic Microfluidic Channels Using PDMS As Hot Embossing Tools

Cost-effective fabrication of photopolymer molds with multi-level microstructures for PDMS microfluidic device manufacture

Towards automated micromachining of PMMA micro channels using CO2 laser and sacrificial mask process

Rapid prototyping of micro/nano poly (methyl methacrylate) fluidic systems using proton beam writing

Inexpensive and rapid fabrication of PDMS microfluidic devices for biological testing applications using low cost commercially available 3D printers

Rapid Prototyping of Poly(methyl Methacrylate) Microfluidic Systems Using Solvent Imprinting and Bonding.