Abstract:This work provides an analysis of the intrinsic mechanical properties of low‐temperature ALD Al2O3 and TiO2 thin films at 40 °C. A nanolaminate strategy is introduced to enhance the mechanical properties of single‐layered low‐temperature ALD thin films. The findings highlight the crucial role of nanolamination and offer insights for the development of future wearable OLEDs. The growing demand for low‐temperature thin‐film encapsulation (TFE) in advanced flexible and wearable organic light‐emitting diodes (OLEDs) has intensified to mitigate thermal issues, which deteriorate the device performance. Herein, Al2O3/TiO2 nanolaminates (A/T NLs)are introduced and fabricated via thermal atomic layer deposition at an exceptionally low temperature of 40 °C, which exhibited enhanced mechanical and environmental robustness. Compared to the single‐layer Al2O3 and TiO2 thin films (0.06% and 0.31%), the A/T NLs with sublayer thickness under 15 nm exhibit dramatic improvement in elongation (0.46–0.53%), attributed to the effective decoupling of critical defects by the Al2O3/TiO2 interfaces. Furthermore, the A/T NLs with 3 nm‐thick‐sublayer demonstrate highly improved water vapor transmission rates of 9.48 × 10−5 g m−2 day−1, making them promising candidates for TFE in wearable OLEDs. Notably, the optimized A/T NL‐encapsulated wearable phosphorescent OLEDs (phOLEDs) exhibit extended lifetimes (LT70), surpassing 200 h in the accelerated environmental conditions (40 °C/90% RH) which is 40 times longer lifetimes compared to the not encapsulated OLEDs. Additionally, the A/T NL‐encapsulated wearable phOLEDs displayed mechanical endurance, enduring 125 h even under the bending strain of 0.4% compared to the Al2O3‐ and TiO2‐encapsulated OLEDs (4 and 18 h).

Improving the Thermal Stability of Top‐Emitting Organic Light‐Emitting Diodes by Modification of the Anode Interface

Thermally Stable Inverted Organic Light-Emitting Diodes Using Ag-doped 4,7-Diphenyl-1,10-phenanthroline As an Electron Injection Layer

Research on interfacial change and regulation of organic light-emitting diodes under thermal stress

Thin Film Encapsulation for the Organic Light-Emitting Diodes Display Via Atomic Layer Deposition

Nanoscale control of doped organic hole-injection layer in thermally annealed top emission organic light emitting diode

Suppression of Initial Degradation via an Interfacial Charge-Induced Overshooting Effect in Solution-Processed Organic Light-Emitting Diodes

The Effect of Low Temperature Thermal Annealing on the Properties of Organic Light‐emitting Device

P‐124: Efficiency Enhanced Top Emitting OLED‐on‐Silicon Microdisplay with Aluminum Anode

High-Efficiency Microcavity Top-Emitting Organic Light-Emitting Diodes Using Silver Anode

Improving the air stability of flexible top-emitting organic light-emitting diodes

Recoverable Electroluminescence from A Contaminated Organic/Organic Interface in an Organic Light-Emitting Diode

Low-temperature Atomic Layer Deposition of Al2O3/alucone Nanolaminates for OLED Encapsulation.

Highly Efficient Top-Emitting Organic Light-Emitting Devices with Aluminium Electrodes

Robust Laminated Anode with an Ultrathin Titanium Nitride Layer for High-Efficiency Top-Emitting Organic Light-Emitting Diodes

Operational stability enhancement in organic light-emitting diodes with ultrathin Liq interlayers

Enhanced Hole Injection Characteristics of a Top Emission Organic Light-Emitting Diode with Pure Aluminum Anode

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Study on low-temperature evaporation of Ag 2 O-based Ag electrode and electron injection layer and their application in OLEDs

An Efficient Organic Light-Emitting Diode with Silver Electrodes

Improving the Performance of OLEDs by Using a Low-Temperature-evaporable N-Dopant and a High-Mobility Electron Transport Host.

Nanolaminate‐Induced Mechanically and Environmentally Robust Al2O3/TiO2 Thin Film Encapsulation by Low‐Temperature Atomic Layer Deposition: Toward Flexible and Wearable OLEDs