Abstract:Due to the fact that more conventional heavy oil recovery methods (heating, emulsification, dilution, and other methods) have many shortcomings, they cannot meet the demand of heavy oil exploitation. Therefore, there is a need for new recovery methods. In this paper, the surface of nano SiO2 was modified with a silane coupling agent, KH-560, to prepare a nanoviscosity reducer (NRV), which has high-temperature resistance (300 °C), calcium and magnesium resistance (Ca2+ + Mg2+ > 900 mg/L) and high viscosity reduction rate (>99%). FTIR and SEM measurements showed that KH560 has been successfully connected to the surface of SiO2. The particle size distribution of NRV is mainly distributed in 50-80 nm, which matches the results of SEM. The experimental results showed that the viscosity reduction rates of 1 wt % NRV on M-1 heavy oil before and after aging were 99.73% and 99.71%, respectively. The viscosity reduction effect of 1% NRV on M-1 heavy oil and the bleeding rate of emulsion formation were investigated when the oil-water ratio ranged from 9:1 to 1:9. The results showed that when the oil-water ratio was between 7:3 and 1:9, the viscosity reduction rate was greater than 99%. Besides, the bleeding rate of emulsion increases with the decrease of the oil-water ratio. What's more, static and dynamic adsorption experiments showed that the adsorption capacity of 1 wt % NRV was 1.746 mg/g and 1.668 mg/g sand, respectively. The interfacial tension experiment showed that the interfacial tension (IFT) between 1 wt % NRV and M-1 heavy oil was 0.052 mN/m, and low interfacial tension was beneficial to displace the oil in the formation pores. At the same time, the displacement effect of NRV on M-1 heavy oil at different concentrations (0.5, 1.0, and 1.5 wt %) and temperatures (200, 250, and 300 °C) was investigated by core flooding experiments. The results showed that the recovery rate increases with the increase of NRV concentration, and 1 wt % NRV at 300 °C will improve the recovery rate of M-1 heavy oil by 27.3% compared to steam flooding. NRV could reduce the viscosity of crude oil, which provides technical guidelines for the exploitation of heavy oil and extra heavy oil.

A review of nanomaterials as viscosity reducer for heavy oil

A review of nanomaterials for nanofluid enhanced oil recovery

Viscosity Reduction Process of Heavy Oil by Catalytic Co-Pyrolysis with Sawdust

Viscosity Modification of Lubricating Oil Based on High-Concentration Silica Nanoparticle Colloidal System

Nanoparticles for Enhancing Heavy Oil Recovery: Recent Progress, Challenges, and Future Perspectives

Development and application of amphiphilic carbon nanotube viscosity reduction systems for enhancing oil recovery of heavy oil reservoirs

High-Efficiency High-Temperature-Resistant Nanosilica Viscosity Reducer for Extra-Heavy Oil Viscosity Reduction

Advances in Chemical Viscosity-Reducing Methods and Techn iques for Viscous Crude Oils

Recyclable surface-functionalized Fe3O4 particles for heavy oil viscosity reduction

Viscosity Reduction Behavior of Carbon Nanotube Viscosity Reducers with Different Molecular Structures at the Oil–Water Interface: Experimental Study and Molecular Dynamics Simulation

Quadripolymers As Viscosity Reducers for Heavy Oil

Improving Heavy Oil Production Using Viscosity Reducers

The Role of Amphiphilic Nanosilica Fluid in Reducing Viscosity in Heavy Oil

Synthesis and Molecular Dynamics Simulation of Amphiphilic Low Molecular Weight Polymer Viscosity Reducer for Heavy Oil Cold Recovery

A Novel Quantitative Evaluation Method for Viscosity Reduction Effect of Heavy Oil Cold Recovery Based on The Area Diffusion Process

A review of nanoparticles and their composites as pour point depressant for waxy crude oil

Synergistic emulsification of polyetheramine/nanofluid system as a novel viscosity reducer of acidic crude oil

A review on upgrading and viscosity reduction of heavy oil and bitumen by underground catalytic cracking

Research Status and Challenges of Mechanism, Characterization, Performance Evaluation, and Type of Nano-Pour Point Depressants in Waxy Crude Oil

Insights into the mechanism during viscosity reduction process of heavy oil through molecule simulation

Nanomaterials for lubricating oil application: A review