Abstract:Due to the fact that more conventional heavy oil recovery methods (heating, emulsification, dilution, and other methods) have many shortcomings, they cannot meet the demand of heavy oil exploitation. Therefore, there is a need for new recovery methods. In this paper, the surface of nano SiO2 was modified with a silane coupling agent, KH-560, to prepare a nanoviscosity reducer (NRV), which has high-temperature resistance (300 °C), calcium and magnesium resistance (Ca2+ + Mg2+ > 900 mg/L) and high viscosity reduction rate (>99%). FTIR and SEM measurements showed that KH560 has been successfully connected to the surface of SiO2. The particle size distribution of NRV is mainly distributed in 50-80 nm, which matches the results of SEM. The experimental results showed that the viscosity reduction rates of 1 wt % NRV on M-1 heavy oil before and after aging were 99.73% and 99.71%, respectively. The viscosity reduction effect of 1% NRV on M-1 heavy oil and the bleeding rate of emulsion formation were investigated when the oil-water ratio ranged from 9:1 to 1:9. The results showed that when the oil-water ratio was between 7:3 and 1:9, the viscosity reduction rate was greater than 99%. Besides, the bleeding rate of emulsion increases with the decrease of the oil-water ratio. What's more, static and dynamic adsorption experiments showed that the adsorption capacity of 1 wt % NRV was 1.746 mg/g and 1.668 mg/g sand, respectively. The interfacial tension experiment showed that the interfacial tension (IFT) between 1 wt % NRV and M-1 heavy oil was 0.052 mN/m, and low interfacial tension was beneficial to displace the oil in the formation pores. At the same time, the displacement effect of NRV on M-1 heavy oil at different concentrations (0.5, 1.0, and 1.5 wt %) and temperatures (200, 250, and 300 °C) was investigated by core flooding experiments. The results showed that the recovery rate increases with the increase of NRV concentration, and 1 wt % NRV at 300 °C will improve the recovery rate of M-1 heavy oil by 27.3% compared to steam flooding. NRV could reduce the viscosity of crude oil, which provides technical guidelines for the exploitation of heavy oil and extra heavy oil.

Recyclable surface-functionalized Fe3O4 particles for heavy oil viscosity reduction

Viscosity Reduction Process of Heavy Oil by Catalytic Co-Pyrolysis with Sawdust

Quadripolymers As Viscosity Reducers for Heavy Oil

Efficient Oil-Water Separation with Amphipathic Magnetic Nanoparticles of Fe3O4@TiO2

Synthesis and Molecular Dynamics Simulation of Amphiphilic Low Molecular Weight Polymer Viscosity Reducer for Heavy Oil Cold Recovery

Evaluation and mechanisms of modified SiO 2 and biosurfactant compound system for viscosity reduction of heavy oil

A review of nanomaterials as viscosity reducer for heavy oil

The Role of Amphiphilic Nanosilica Fluid in Reducing Viscosity in Heavy Oil

Synergistic emulsification of polyetheramine/nanofluid system as a novel viscosity reducer of acidic crude oil

Study on the in situ desulfurization and viscosity reduction of heavy oil over MoO3–ZrO2/HZSM-5 catalyst

Molecular Design of the Amphiphilic Polymer as a Viscosity Reducer for Heavy Crude Oil: From Mesoscopic to Atomic Scale

Fe3O4/PS Magnetic Nanoparticles: Synthesis, Characterization and Their Application As Sorbents of Oil from Waste Water

Effective Recovery of Oil Slick Using the Prepared High Hydrophobic and Oleophilic Fe3O4 Magnetorheological Fluid

Preparation of surface modified nano-hydrotalcite and its applicaiton as a flow improver for crude oil

High-Efficiency High-Temperature-Resistant Nanosilica Viscosity Reducer for Extra-Heavy Oil Viscosity Reduction

Improving Heavy Oil Production Using Viscosity Reducers

Functionalized Hierarchical ZSM-5 Zeolites for the Viscosity Reduction of Heavy Oil at Low Temperature

Synthesis of Polycarboxylate Viscosity Reducer and the Effect of Different Chain Lengths of Polyether on Viscosity Reduction of Heavy Oil

Insights into the Structure-Performance Relationship and Viscosity Reduction Performance of Recyclable Magnetic Fe/Zeolite for Crude Oil Aquathermolysis

Fluorinated polyether grafted TiO2 magnetic composite material for oil-water separation of crude oil emulsion

Rheological properties of oil–water Pickering emulsion stabilized by Fe3O4 solid nanoparticles