Abstract:A self-sustaining reactor system with both a high conversion ratio (CR) and fuel discharge burnup (B d ) is essential for enhancing the utilization of nuclear fuel and improving its natural resources. The mechanical spectral shift control (SSC) method can improve the efficiency of nuclear fuel utilization by removing, or at least greatly lowering, soluble and burnable neutron poisons during reactor operation. The implementation of the proposed mechanical SSC method involved the on-power variation of the moderator-to-fuel volume ratio (V M /V F ). This was achieved by means of movable natural uranium spectral shift control rods (NU-SSCRs) distributed uniformly within the fuel assembly. In this work, the neutronic characteristics of the VVER-1000 fuel assembly benchmark with mechanical SSC regulation have been investigated, compared to the traditional poison method described in the OECD/NEA benchmark model. We adopted three different sequences of NU-SSCRs withdrawal strategies at various burnup points, each associated with different V M /V F , during one batch fuel loading pattern. The findings revealed a notable improvement of ≈40 % in the discharge burnup across the three different withdrawal strategies, alongside the attainment of a CR value of 0.82 compared to the benchmark poisoned model. Additionally, the mechanical SSC regulation has effectively suppressed the excess reactivity at the beginning of the cycle compared to boric acid (H 3 BO 3 ) and gadolinium oxide (Gd 2 O 3 ), which are incorporated in the benchmark model by 754 pcm. The results showed a higher accumulated mass of plutonium in the fuel assembly of 3.3, 5.2, and 6 kg for the three different sequences of withdrawing strategies, respectively, at the end of the cycle. Furthermore, the void reactivity coefficient has been investigated for the three different withdrawal strategies in both partially voided (20 % void) and completely voided (100 % void) systems.

Possibilities of Better Utilization of MOX fuel in VVER type reactors by optimizing neutron spectrum

Possible ways to solve the problems of using MOX fuel in thermal reactors

Particle emission from irradiated VVER-1200 fuel with Am burnable absorber

Neutronic examination of the U–Mo accident tolerant fuel for VVER-1200 reactors

Study of Minor Actinides Transmutation in PWR MOX fuel

Nuclear Energy Sustainability and MOX Fuel: Global Scenarios Evaluations up to 2050

Transmutation Study of Minor Actinides in Mixed Oxide Fueled Typical Pressurized Water Reactor Assembly

Feasibility Study on the Analysis of MOX Particle Behavior

Transmutation of Minor Actinides and Power Flattening in PWR MOX Fuel

Neutronic characteristics of the VVER-1000 fuel assembly with mechanical spectral shift regulation

Neutron radiation characteristics of the IVth generation reactor spent fuel

Investigating the possibility of using a mixture of thorium with different fissile materials as a fuel in TRISO particles for the PBMR-400 reactor

Neutronic Evaluation of LWR Based SMR with TRU Fuel and Comparison with Different Core Configuration of UO2 and MOX Fuel

THE POSSIBILITY OF REFINING PLUTONIUM IN THE BN-800

Evaluation of neutronic parameters for RITM-200 reactor unit considering (238U+235U)O2, (232Th+235U)O2 and (232Th+233U)O2 dispersed fuel using MCU-PTR

Possibility assessment for production of non-traditional nuclear fuel in thorium blanket of hybrid thermonuclear reactor

Potentials in "nonproliferating" nuclear fuel: Design and implications on a PWR fuel cycle

Study on neutronic behavior of VVER-1000 fuel assembly with duplex fuel rod design

The main problems of transmutation of actinides and long-lived fission products from NPP spent fuel

Physical aspects for involvement of thermonuclear reactors into nuclear power systems

Assessment of loading scheme and moderation impact on minor actinide transmutation in VVER-1000 fuel assembly