Abstract:Hot Universe Baryon Surveyor (HUBS), a Chinese space mission, is proposed to find a large fraction of the so-called missing baryons, which would help us to understand more about the structure formation and evolution of the universe. Both theoretical and experimental results show that developing a highly efficient soft X-ray spectrometer over a large field of view and with a high energy resolution is the key to detect the “missing baryons”. X-ray microcalorimeters based on a transition-edge sensor (TES) array is required for HUBS, which aims to have 1 deg2 field of view (FoV) with 1’ angular resolution and 2 eV energy resolution optimized around 0.6 keV. Taking the high throughput X-ray optical focusing system on HUBS into account, the TES array is designed to have 60 x 60 pixels with an area of 1 mm2 for each pixel. The microcalorimeter consists of a TES, a weak thermal link to a heat bath, and a semi-metal or normal metal absorber to increase the X-ray absorption efficiency. When an X-ray photon with a given energy is absorbed, the temperature of the absorber increase, that can be monitored by measuring the resistance change of the TES. A bilayer of a superconductor and a normal metal is used to fabricate a TES with a critical temperature (Tc) of ~100 mK. The latter is set for the required energy resolution. For HUBS, both MoCu and TiAu TES technologies are considered in its development phase. Here we will focus on TiAu TES calorimeters designed and partially fabricated at SRON for HUBS. Recent demonstration of a resolution of 2.5 eV at 5.9 keV in an AC readout at SRON for X-IFU on board of Athena illustrates the promising of this technology. However, the challenging for the HUBS array is the large pixel size. We will report the design and fabrication of prototype HUBS calorimeters.

Development of a photon-counting near-fano-limited x-ray CMOS image sensor for THESEUS' SXI

The XGIS instrument on-board THESEUS: the detection plane and on-board electronics

The XGIS instrument on-board THESEUS: detector principle and read-out electronics

Development of the superconducting detectors and read-out for the X-IFU instrument on board of the X-ray observatory Athena

Performance of a focal plane detector for soft X-ray imaging spectroscopy based on back-illuminated sCMOS

Beamline Spectroscopy of Integrated Circuits With Hard X-ray Transition Edge Sensors at the Advanced Photon Source

The path toward 500 $μ$m depletion of AstroPix, a pixelated silicon HVCMOS sensor for space and EIC

The high-speed X-ray camera on AXIS

Soft x-ray detection for small satellites with a commercial CMOS sensor at room temperature

Developing X-Ray Microcalorimeters Based on TiAu TES for HUBS

Developments on Frequency Domain Multiplexing Readout for Large Arrays of Transition-Edge Sensor X-ray Micro-calorimeters

Development of frequency domain multiplexing for the X-ray Integral Field Unit (X-IFU) on the Athena

High-speed Readout System of X-ray CMOS Image Sensor for Time Domain Astronomy

Development of an n-channel CCD, CCD-NeXT1, for Soft X-ray Imager onboard the NeXT satellite

Chromatic X-Ray imaging with a fine pitch CdTe sensor coupled to a large area photon counting pixel ASIC

Imaging performance above 150 keV of the wide field monitor on board the ASTENA concept mission

Performance of SOI Pixel Sensors Developed for X-ray Astronomy

Continued developments in X-ray speed reading: fast, low noise readout for next-generation wide-field imagers

Recent Progress on Developments and Characterization of Hybrid CMOS X-ray Detectors