Abstract:Morocco has made a concerted effort in previous years to produce renewable energy to meet market demand while protecting the environment and opening the route for circular economy. By-product from steel and iron industries in Morocco that employ electric arc furnace to produce steel is the focus of the present paper. It aims to study the possibility of using by-product "Electric Arc Furnace Slag" issued from Moroccan steel and iron industry as high-temperature sensible thermal energy storage material for the benefit of the same industry. In first, a fully characterization of the selected by-product has been performed. As a result, the filler material showed great thermophysical properties in terms of densities, thermal capacity, thermal diffusivity, and thermal conductivity. The bulk and skeletal densities are of around 3477.64 and 3913.9 kg m −3 , respectively. The thermal capacity ranges between 0.3 and 0.85 kJ kg −1 K −1 for as-received by-product and from 0.6 to 0.9 kJ kg −1 K −1 for the by-product after thermal cycling. Its crystallographic structure and morphology remain similar to the one of EAF-slag studied in open literature. Thereafter, the material stability and suitability for high-temperature (up to 700 °C) thermal energy storage have been highlighted. The characteristics of EAF-slag after thermal cycling and isothermal study were compared to those of raw EAF-slag. Accordingly, the filler material is stable and able to store thermal energy at high temperatures. Equally important, thermal cycling impacts positively the filler material. Thanks to the oxidation to magnetite, the energy density of EAF-slag increases. More importantly, the material becomes more stable by exhibiting less than 1% of mass loss. Yet, few cracks were observed inside the cycled material. The investigation revealed that the fast-heating rate (superior to 5 °C min −1 ) is the main responsible. As a result, the authors recommend a slow heating rate especially for the first heating cycles of this by-product (around 2 °C min −1 ).

Influencing parameters on the sintering process of steel slag-based ceramics for high-temperature thermal energy storage

Thermal Properties and Friction Behaviors of Slag As Energy Storage Material in Concentrate Solar Power Plants

Extensive experimental characterization of Moroccan steel and iron industry by-product for high-temperature thermal energy storage

Advances in chemical and physical properties of electric arc furnace carbon steel slag by hot stage processing and mineral mixing

Preparation and performance characterization of steel slag-based thermal storage composites for waste recycling and thermal energy storage

A novel composite for thermal energy storage from alumina hollow sphere/paraffin and alkali-activated slag

High-Temperature Sensible Heat-Based Thermal Energy Storage Materials Made of Vitrified MSWI Fly Ashes

Experimental study on storage performance of packed bed solar thermal energy storage system using steel slag

Modification of Steel Slag to Prepare Chlorides Based Composite Phase Change Materials with Shape Stability for High-Temperature Thermal Energy Storage

Characterization of the Ratcheting Effect on the Filler Material of a Steel Slag-Based Thermal Energy Storage

Steel slag-KNO 3 phase change composites for thermal storage at medium-high temperature and solid waste recycling

Applicability of Coal Slag for Application As Packed Bed Thermal Energy Storage Materials

Characterization of Supplementary Cementitious Materials and Fibers to Be Implemented in High Temperature Concretes for Thermal Energy Storage (TES) Application

Stabilization of thermal storage ceramics via the phase reconstruction of ferrotitanium slag and migration of Mg element

Use of Arc Furnace Slag and Ceramic Sludge for the Production of Lightweight and Highly Porous Ceramic Materials

Characterization of Moroccan steel slag waste: The potential green resource for ceramic production

Preparation and characterization of steel slag-based low, medium, and high-temperature composite phase change energy storage materials

Preparation and thermal shock resistance of anorthite solar thermal energy storage ceramics from magnesium slag

High-temperature (800 °C) Performance of Spodumene Slag-Based Ternary Sulphate Composite Phase Change Materials with Improved Mechanical Property

Experimental and computational optimization of eco-friendly mortar blocks for high temperature thermal energy storage of concentrated solar power plants

Improved properties of the Co/Al-doped carbide slag pellet as a potential high-temperature thermal battery by tunable coating strategy