Abstract:Vegetable tannins are excellent options to produce adhesives for the panel industry since they have the capacity to reduce formaldehyde emissions and are derived from renewable sources. They also allow for the possibility of increasing the resistance of the glue line through the use of natural reinforcements such as cellulose nanofibrils. Condensed tannins, polyphenols isolated from tree bark, are widely studied for the production of natural adhesives as an alternative to commercial synthetic adhesives. So, the purpose of our research is to show a natural adhesive alternative for wood bonding. Therefore, the objective of the study was to evaluate the quality of tannin adhesives of different species reinforced with different nanofibrils and thus predict which adhesive is the most promising at different concentrations of reinforcement and with different types of polyphenols. To meet this objective, polyphenols were extracted from the bark, nanofibrils were obtained, and both processes followed the current standards. Then, the adhesives were produced, their properties were characterized, and they were chemically analyzed via Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). A mechanical shear analysis of the glue line was also performed. According to the results, the addition of cellulose nanofibrils affected the physical properties of the adhesives, mostly the content of solids and the gel time. In the FTIR spectra, the OH band of the 5% Pinus and 5% Eucalyptus (EUC) TEMPO in the barbatimao adhesive and the 5% EUC of the cumate red adhesive were reduced, possibly due to their higher moisture resistance. Mechanical tests of the glue line showed that barbatimao with 5% Pinus and cumate red with 5% EUC performed best in the dry and wet shear tests. The control was the best-performing sample in the test of the commercial adhesives. The cellulose nanofibrils used as reinforcement did not change the thermal resistance of the adhesives. Therefore, the addition of cellulose nanofibrils to these tannins is an interesting means of increasing the mechanical strength, as occurred in commercial adhesive with 5% EUC. Thus, the physical and mechanical properties of tannin adhesives were better with reinforcement, making it possible to expand the use of these adhesives in the panel industry. At the industrial level, it is important to replace synthetic products with natural ones. Besides environmental and health issues, there is the question of the value of petroleum-based products, which have been widely studied so that they can be replaced.

Synthesis and Characterization of Polyester Derived from Renewable Source and its Application as Tackifiers Resins in Hot Melt Pressure Sensitive Adhesives (HMPSA)

Synthesis and Characterization of Polyester Derived from Glycerol and Its Application as an Adhesive on Different Adherents

<title language="spa">Sintesis de poliuretanos a partir de polioles obtenidos a partir del aceite de higuerilla modificado por transesterificación con pentaeritritol Polyurethanes sintetized of polyols obtained from castor oil modified by transesterification with pentaerythritol

Surface Enrichment by Conventional and Polymerizable Sulfated Nonylphenol Ethoxylate Emulsifiers in Water-Based Pressure-Sensitive Adhesive

Environmentally friendly adhesives derived from glycerol-based polymers

Synthesis and characterization of new thermoplastic polyurethane adhesives containing rosin resin as an internal tackifier

Development and Application of a Lignin-Based Polyol for Sustainable Reactive Polyurethane Adhesives Synthesis

Substitution of petrochemical compounds for polyphenols of natural origin reinforced with cellulose nanofibrils to formulate adhesives for wood bonding

Valorization of Uruguayan Pinus elliottii Bark by Developing Sustainable Adhesives

Adhesive Performance of Acrylic Pressure-Sensitive Adhesives from Different Preparation Processes

Rheological Properties of Hot Melt Pressure Sensitive Adhesives (HMPSAs) Based on Styrene–Isoprene Copolymers, Part 3: Rheological Behavior of Different Block Copolymers With High Diblock Content

Enzymatic Synthesis of Hydroxy-Functionalized Glycerol-Based Polyesters: A Study of Functionalization, Regioselectivity Control, and Catalyst Reuse

Effect of Polymerized Rosin on Polymer Microstructure and Adhesive Properties in Tackified Acrylate Emulsions

Study on preparation and properties for rosin derivatives-acrylate copolymer emulsion

Feasibility of Processing Hot-Melt Pressure-Sensitive Adhesive (HMPSA) with Solvent in the Lab

Preparation of the Hydrogenated Acrylic Rosin/Acrylate Composite Emulsion and Properties of the Pressure Sensitive Adhesive

Dibutyl Itaconate and Lauryl Methacrylate Copolymers by Emulsion Polymerization for Development of Sustainable Pressure-Sensitive Adhesives

Synthesis and Properties of Acrylic Pressure Sensitive Adhesives

Insitu Synthesis and Properties of Hydrogenated Rosin/Polyacrylate Composite Miniemulsions-Based Pressure Sensitive Adhesives

Epoxidation of Styrene-Isoprene-Styrene Block Copolymer and Its Use for Hot-Melt Pressure Sensitive Adhesives

In situ synthesis and properties of hydrogenated rosin/polyacrylate composite miniemulsions-based pressure sensitive adhesives