Adhesive Performance of Acrylic Pressure-Sensitive Adhesives from Different Preparation Processes

Irene Márquez,Núria Paredes,Felipe Alarcia,José Ignacio Velasco
DOI: https://doi.org/10.3390/polym13162627
IF: 5
2021-08-07
Polymers
Abstract:A series of pressure-sensitive adhesives (PSAs) was prepared using a constant monomeric composition and different preparation processes to investigate the best combination to obtain the best balance between peel resistance, tack, and shear resistance. The monomeric composition was a 1:1 combination of two different water-based acrylic polymers—one with a high shear resistance (A) and the other with a high peel resistance and tack (B). Two different strategies were applied to prepare the adhesives: physical blending of polymers A and B and in situ emulsion polymerization of A + B, either in one or two steps; in this last case, by polymerizing A or B first. To characterize the polymer, the average particle size and viscosity were analyzed. The glass transition temperature (Tg) was determined by differential scanning calorimetry (DSC). The tetrahydrofuran (THF) insoluble polymer fraction was used to calculate the gel content, and the soluble part was used to determine the average sol molecular weight by means of gel permeation chromatography (GPC). The adhesive performance was assessed by measuring tack as well as peel and shear resistance. The mechanical properties were obtained by calculating the shear modulus and determination of maximum stress and the deformation energy. Moreover, an adhesive performance index (API) was designed to determine which samples are closest to the requirements demanded by the self-adhesive label market.
polymer science
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to develop pressure - sensitive adhesives (PSAs) suitable for glass bottle labels so that they can meet the requirements for peel strength, initial tack, and shear strength in the market. Specifically, the research aims to find the best combination to achieve the optimal balance among peel strength, initial tack, and shear strength through different preparation processes while keeping the monomer composition unchanged. These three properties are particularly important for the self - adhesive label market because they directly affect the usage effect and durability of the labels. To achieve this goal, the researchers designed two different water - based acrylic polymers A and B, where A has high shear strength, and B has high peel strength and initial tack. Then, these polymers were prepared by four methods: physically mixing the polymerized polymers; one - step in - situ emulsion polymerization; two - step in - situ emulsion polymerization, in which one formulation (A or B) was synthesized in each step, and two different polymerization sequences were tested. In this way, the researchers hoped to explore the influence of different preparation processes on the final properties of the polymers, especially how to optimize the adhesive properties of the polymers while keeping the monomer composition unchanged. In addition, the research also designed an adhesive performance index (API) to evaluate which samples are closest to the requirements of the self - adhesive label market. Through this method, the research not only focuses on the basic physicochemical properties of the polymers, such as average particle size, viscosity, glass - transition temperature (\(T_g\)), gel content, and average soluble molecular weight (\(M_w\)), but also deeply analyzes the adhesive properties of the polymers, including initial tack, peel strength, and shear strength, as well as mechanical properties, such as shear modulus, maximum stress, and deformation energy.