Rheological Properties of Hot Melt Pressure Sensitive Adhesives (HMPSAs) Based on Styrene–Isoprene Copolymers, Part 3: Rheological Behavior of Different Block Copolymers With High Diblock Content

M. N. Cazenave,C. Derail,F. Leonardi,G. Marin,N. Kappes

DOI: https://doi.org/10.1080/00218460590954610

2005-06-01

The Journal of Adhesion

Abstract:The processing and application properties of hot-melt pressure-sensitive adhesives (HMPSA) are governed, to a large extent, by their rheological properties. Coating of the HMPSA is performed at high temperatures in the molten state. At room temperature, the adhesive satisfies the Dahlquist criterion and, consequently, has permanent tack. We have particularly studied the full formulations based on triblock and diblock copolymers, and also those based on newly designed molecules, such as tetrablock or radial copolymers. We have demonstrated in the previous articles of this series that, for these systems, the volume fraction of the free polyisoprene is the most important parameter that drives the tack performances by controlling the level of the secondary elastic plateau modulus observed in the low-frequency range. To improve the end-user properties, we have increased the diblock content in the blends. We describe here the dynamic mechanical properties, at room temperature, of the pure copolymer blends (i.e., without addition of a tackifying resin) and the full HMPSA formulations. We focus particularly in this article on blends that contain a high diblock content. The effect of the morphology of the diblock copolymer on the rheological behavior of the adhesive is discussed in detail. Finally, we propose a model, based on molecular dynamics concepts, which describes the rheological behavior in a very wide range of frequencies for all copolymers and full formulations of the study.

materials science, multidisciplinary,engineering, chemical,mechanics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to improve the end - user performance of hot - melt pressure - sensitive adhesives (HMPSA) by studying the rheological behavior of styrene - isoprene copolymer - based HMPSA under high diblock content conditions. Specifically, the author focuses on how to reduce the secondary elastic plateau modulus in the low - frequency range by increasing the proportion of diblock copolymer, thereby optimizing the tack and processing properties of HMPSA.

### Research Background and Problem Description

1. **Application Requirements of HMPSA**:
- Hot - melt pressure - sensitive adhesives (HMPSA) are widely used in fields such as labels and tapes, and their performance is mainly determined by their rheological characteristics.
- At room temperature, HMPSA needs to meet the Dahlquist criterion, that is, it has permanent tack.

2. **Existing Research Basis**:
- Previous studies have shown that the volume fraction of free polyisoprene is a key parameter affecting the adhesive performance, which controls the level of the secondary elastic plateau modulus in the low - frequency range.
- Increasing the proportion of diblock copolymer can improve the end - user performance of HMPSA.

3. **Specific Problems**:
- How to reduce the secondary elastic plateau modulus in the low - frequency range by increasing the proportion of diblock copolymer?
- What is the specific impact of the morphology of diblock copolymer on the rheological behavior of HMPSA?

### Research Methods and Objectives

To answer the above questions, the author carried out the following research:

1. **Experimental Design**:
- Prepared copolymer mixtures with different diblock contents and characterized them using techniques such as mechanical spectroscopy, thermomechanical analysis, and small - angle neutron scattering (SANS).
- Studied the dynamic mechanical properties of pure copolymer mixtures (without adding tackifying resins) and complete HMPSA formulations.

2. **Model Building**:
- Proposed a model based on the concept of molecular dynamics, which describes the rheological behavior of all copolymers and their complete formulations in a wide frequency range.

3. **Results and Discussion**:
- It was found that as the diblock content increases, the secondary elastic plateau modulus gradually decreases, but tends to a constant value at high diblock content.
- The morphology of diblock copolymer significantly affects its rheological behavior, especially in the low - frequency range.

Through these studies, the author aims to provide theoretical support and technical guidance for the development of HMPSA with better performance.