Abstract:Hard carbon (HC) remains the most viable choice as a negative electrode for sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs) owing to its higher energy density (discharge up to zero volts), higher capacity (distinct storage mechanisms), and cycling stability. Herein, a biomass jute fiber precursor HC anode (JPC) with varying porosity is reported for the first time as a low-cost and sustainable high-performance HC anode for SIBs and PIBs. Direct carbonization results in micro-meso porous HC (JPC-D), and micro-wave pretreated jute fiber results in ultramicroporous HC (JPC-M). The mesoporosity generated in JPC-D during synthesis outperforms the ultramicroporous JPC-M with a high reversible capacity of 328 mAh g-1 (iCE = 66%) at a current density of 30 mA g-1 (0.1C) with superior capacity retention of 84% after 100 cycles in SIBs. The Na+ ion and K+ ion storage in HCs, especially at lower voltages, shows distinct storage mechanisms that depend on the morphology and porosity of the material. JPC-D contributed 39% of its total capacity through the plateau region capacity (PRC), suggesting more pore filling from hierarchical porosity in SIBs. JPC-D and JPC-M exhibit more insertion-based capacity than pore-filling processes in PIBs. The presence of inorganic impurities (Ca, Si, Al, and Fe) encapsulated in the carbon structure plays a critical role in developing mesopores. The yield (%) of HC from direct carbonization per kilogram of jute is ∼34%, which makes it cheaper than HC from sugar-based precursors and 1.5 times more affordable than other biomass-derived HC. The jute-based micro-mesoporous HC is a novel, cost-effective, sustainable approach to designing HC for a PRC-based battery-type anode in SIBs and PIBs.

Jute fiber based micro-mesoporous carbon: A biomass derived anode material with high-performance for lithium-ion batteries

Wheat Bran Derived Carbon Toward Cost-Efficient and High Performance Lithium Storage

Preparation of Biomass-Derived Carbon Loaded with MnO2 As Lithium-Ion Battery Anode for Improving Its Reversible Capacity and Cycling Performance

In Situ Nitrogen-Doped Helical Mesoporous Carbonaceous Nanotubes for Superior-High Lithium Anodic Performance

Lignin-derived Fused Electrospun Carbon Fibrous Mats As High Performance Anode Materials for Lithium Ion Batteries.

Biomass derived fibrous porous carbon loaded zinc oxide nanoparticles as high-performance anode materials for lithium ion batteries

Submicron cubic ZnMn 2 O 4 loaded on biomass porous carbon used as high-performance bifunctional electrode for lithium-ion and sodium-ion batteries

Synthesis of large mesoporous carbon from cotton stalk for use as an anode for lithium-ion batteries

Electrospun Kraft Lignin/Cellulose Acetate-Derived Nanocarbon Network As an Anode for High-Performance Sodium-Ion Batteries.

A porous carbon based on the surface and structural regulation of wasted lignin for long-cycle lithium-ion battery

Construction and preparation of nitrogen-doped porous carbon material based on waste biomass for lithium-ion batteries

Lignosulfonate for improving electrochemical performance of chitin derived carbon materials as a superior anode for lithium-ion batteries

Highly conductive and porous lignin-derived carbon fibers

Zn5(OH)6(CO3)2-assisted controlled fabrication of microcrystalline cellulose-derived hierarchical porous carbon for high-performance lithium storage

Preparation of ZnFe2O4/α-Fe2O3 Nanocomposites From Sulfuric Acid Leaching Liquor of Jarosite Residue and Their Application in Lithium-Ion Batteries

Jute-Fiber Precursor-Derived Low-Cost Sustainable Hard Carbon with Varying Micro/Mesoporosity and Distinct Storage Mechanisms for Sodium-Ion and Potassium-Ion Batteries

A universal method to fabricating porous carbon for Li-O2 battery

Biomass Alginate Derived Oxygen-Enriched Carbonaceous Materials with Partially Graphitic Nanolayers for High Performance Anodes in Lithium-Ion Batteries

Biomass Waste Derived Low Cost Activated Carbon from Carchorus Olitorius (Jute Fiber) as Sustainable and Novel Electrode Material

Li-ion charge storage performance of wood-derived carbon fibers@MnO as a battery anode

Melt-Spinning Mesophase Pitch-Based Graphite Fibers as Anode Materials for High-Rate Lithium-Ion Batteries