Abstract:The incorporation of supplementary cementitious materials (SCMs) in concrete can improve the properties of concrete partially immersed in salt solution. However, the current partial immersion environment only considers the capillary action above the still water level, does not consider the capillary action above the fluctuating water level in dry-wet cycling environment. In this paper, a series of indoor exposure experiments were carried out to investigate the effects of incorporating polynary SCMs including fly ash (FA), ground granulated blast furnace slag (GGBFS) and silica fume (SF) on the sulfate resistance and chloride impermeability of concrete considering the capillary action above the fluctuating water level in dry-wet cycling environment. A total of 15 groups of concrete with different mix proportions (total 150 concrete specimens) were designed to study the effects of different replacement levels of polynary SCMs on concrete properties. The effects of incorporating polynary SCMs on the chloride impermeability of concrete above and in the fluctuating water level zone were investigated. The scanning electron microscope (SEM), x-ray diffraction (XRD) and mercury intrusion porosimetry (MIP) tests were used to analyze the microstructure of concrete. The results indicate that when concrete is incorporated with polynary SCMs and subjected to capillary action above the fluctuating water level, the compressive strength and chloride impermeability first increase and then decrease with the increase of FA content; the compressive strength and chloride impermeability decrease with the increase of GGBFS content; the compressive strength first increase and then decrease with the increase of SF content, and the chloride impermeability increase with that. The transport process of chloride in concrete above the fluctuating water level zone includes the longitudinal transport under capillary action and the transverse transport under concentration gradient action. The combined effects of both cause the higher chloride concentration in concrete above the fluctuating water level zone. Comprehensively considering the influence of different mix proportions on the sulfate resistance and chloride impermeability of concrete, it is determined that 20% FA + 5% SF is the optimal replacement level with the excellent performance considering the capillary action above the fluctuating water level in dry-wet cycling environment.

Influence of Colloidal Silica and Silica Fume on the Rheology and Mechanical Properties of High-Performance Shotcrete

Prediction of Plastic Shrinkage Cracking of Supplementary Cementitious Material-Modified Shotcrete Using Rheological and Mechanical Indicators

Porosity, Pore Size Distribution and Chloride Permeability of Shotcrete Modified with Nano Particles at Early Age

Rheological behaviour, setting time, compressive strength and microstructure of mortar incorporating supplementary cementitious materials and nano-silica

Experimental Study on the Improvement of Shotcrete Performance by Addition of Calcium Alumiante Based Accelerator and Metakaolin

Hydration and Mechanical Properties of High-Volume Fly Ash Concrete with Nano-Silica and Silica Fume

Influence of materials and nozzle geometry on spray and placement behavior of wet-mix shotcrete

Effect of Additives on the Rheological and Mechanical Properties of Microfine-Cement-Based Grout

Rheological Behavior and Microstructure Characteristics of SCC Incorporating Metakaolin and Silica Fume

Study on rheological model and characteristics of wet shotcrete

Influence of silica fume on the workability and hydration process of ultra-high performance concrete

Effect of silica fume on rheology of slag-fly ash-silica fume-based geopolymer pastes with different activators

Effects of incorporating polynary SCMs on sulfate resistance and chloride impermeability of concrete considering capillary action in dry-wet cycling environment

Investigations on the Performance of Shotcrete Using Artificial Lightweight Shale Ceramsite as Coarse Aggregate

Experimental study and numerical simulation of the effect of different fiber types on the basic mechanical properties of shotcrete

Optimizing concrete rheology to mitigate aerosol pollutants in wet-mix shotcrete processes

Effects of Blast Furnace Slag Powder and Limestone Powder on the Mechanical Properties and Durability of Shotcrete Using Monocalcium Aluminate Setting Accelerator

Study on the Influence of Silica Fume (SF) on the Rheology, Fluidity, Stability, Time-Varying Characteristics, and Mechanism of Cement Paste

Effect of Nanostructured Silica Additives on the Extrusion-Based 3D Concrete Printing Application

Rheological Properties of Composite Binder Paste Containing Different Types of Silica Fume

The synergistic effect of greenhouse gas CO 2 and silica fume on the properties of 3D printed mortar