Abstract:Demolished concrete, as one main form of construction and demolition wastes, has been widely studied of being utilized as recycled aggregates (RAs) in new concrete production. However, existing studies of applying RAs have been limited to the mechanical and durability issues of cementitious composites containing RAs. There has not been sufficient research of adopting RAs in cementitious products to also address the environmental sustainability. On the other hand, existing research utilizing cementitious products (e.g., concrete pavement) for air purification purpose have not adequately considered RA usage. Aiming to address the two sustainable objectives (i.e., waste diversion and air purification) simultaneously in concrete mix, this research adopted a two-step approach. Firstly, we studied and identified the optimal mix design of pervious concrete containing TiO2-soaked recycled coarse aggregates (RCAs) in order to achieve the higher compressive strength; secondly, we investigated the photocatalytic performance of pervious concrete containing RCAs coated with TiO2 photocatalysts. The photocatalytic performance of pervious concrete was also tested by applying a 10-min heavy rainwater wash. Experimental test results revealed that the internal voids of adhered mortar enabled RCAs to absorb more TiO2 particles. The NO degradation rate of TiO2-soaked RCAs increased from 71.4% to 80.6% when RCAs' size decreased from 15-20 mm to 5-10 mm. The orthogonal experimental investigation indicated that water-to-binder ratio had the most significant effect on concrete compressive strength, followed by ratio of RCAs to binder, and replacement ratio of RCAs to natural aggregates. The optimized mix design for pervious concrete containing RCAs was identified to achieve highest strength (i.e., water-to-binder ratio at 0.35, coarse aggregate-to-binder ratio of 3 by mass, fly ash replacement rate to Portland cement at 5%, and 50% replacement ratio of RCAs to NCAs). The concentration of TiO2 solution at 0.3% was identified as the optimal ratio to achieve the highest NO degradation rate at 70% before rainwater wash. The NO degradation rates of pervious concrete still reached nearly 50% after 10-min heavy rainwater wash, indicating that pervious concrete using RCAs coated with TiO2 could largely maintain its photocatalytic capacity. This study addresses two main social and environmental issues in developing countries (e.g., China), namely overwhelming amount of construction & demolition wastes being generated, and air pollution. It leads to the cleaner production in concrete pavement construction by achieving the optimization between waste reuse, air purification, and engineering properties of porous concrete. (c) 2019 Elsevier Ltd. All rights reserved.

Optimizing concrete rheology to mitigate aerosol pollutants in wet-mix shotcrete processes

Influence of materials and nozzle geometry on spray and placement behavior of wet-mix shotcrete

Influence of Colloidal Silica and Silica Fume on the Rheology and Mechanical Properties of High-Performance Shotcrete

Study on Modification of Alkali-Free Liquid Accelerator of Mine-Used Wet-Mix Shotcrete

Mix-Design Optimization of Self-Compacting Paste Incorporating Powdery Industrial Solid Wastes Based on a Paste Rheological Threshold Theory

Optimization of defoaming-flocculation-dewatering indices of earth pressure balance (EPB) shield muck using response surface methodology and desirability approach

Study on optimization of shotcrete loading technology and the diffusion law of intermittent dust generation

Optimization of fresh and hardened properties of structural light weight self-compacting concrete mix design using response surface methodology

Analysis of Rebound Rate of Wet Shotcrete Based on Experiment and Discrete Element Method

Tailoring Light-Weight Aggregates for Concrete 3D Printing Applications

Development of a New Type of Alkali-Free Liquid Accelerator for Wet Shotcrete in Coal Mine and Its Engineering Application

Surfactants to enable quick nozzle mixing in 3D concrete printing

Synthesis and performance study of biomass-based suppressant and its application in radioactive aerosol sedimentation

Chemistry-informed multi-objective mix design optimization of self-compacting concrete incorporating recycled aggregates

Study on the workability, mechanical property and water absorption of reactive powder concrete

Studying the Mix Design and Investigating the Photocatalytic Performance of Pervious Concrete Containing TiO2-Soaked Recycled Aggregates

Spray-based 3D concrete printing parameter design model: Actionable insight for high printing quality

An Experimental Study on the Elbow Pressure Drop and Conveying Stability of Pneumatic Conveying for Stiff Shotcrete Based on Response Surface Methodology

Development and Optimizing-mixing of New-type Non-alkaline Liquid Accelerator of Shotcrete

Development of a Screening Tool for Rapid Fly Ash Evaluation for Mitigating Alkali Silica Reaction in Concrete

Optimization of Ultra-High Performance Concrete Based on Response Surface Methodology and NSGA-II