Abstract:Selenite (Se4+), a significant source of water pollution above the permissible limits, is considered a valuable metal by environmentalists. In this study, we described a novel electrochemical sensor that utilized a carbon paste electrode (CPE) that was modified using multiwall carbon nanotubes (MWCNTs) and poly(1-aminoanthraquinone) (p-AAQ) for finding Se4+ in water samples. Electrochemical quantification of Se4+ depends on the formation of a selective complex (piaselenol) with p-AAQ. In this work, we prepared a CPE modified by physical embedding of MWCNTs and 1-aminoanthraquione (AAQ), while the polymer film was formed by anodic polymerization of AAQ by applying a constant potential of 0.75 V in 0.1 M HCl for 20 s followed by cyclic voltammetry (CV) from -0.2 to 1.4 V for 20 cycles. The modified CPE was used for differential pulse voltammetry (DPV) of Se4+ in 0.1 M H2SO4 from 0 to 0.4 V with a characteristic peak at 0.27 V. Further, the proposed sensor was characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and electrochemical impedance spectroscopy (EIS). The analytical conditions regarding the electrode performance and voltammetric measurements were optimized, with the accumulation time and potential, supporting electrolyte, differential-pulse period/time, and amplitude. The EIS results indicated that the p-AAQ/MWCNTs-modified CPE sensor (p-AAQ/MWCNTs/CPE) that also exhibited low charge-transfer resistance (R ct) toward the anodic stripping of Se4+, exhibited good analytical performance toward different concentrations of Se4+ in a linear range of 5-50 μg L-1 Se4+ with a limit of determination (LOD) of 1.5 μg L-1 (3σ). Furthermore, differential-pulse voltammetry was employed to determine different concentrations of Se4+ in a linear range of 1-50 μg L-1 Se4+, and an LOD value of 0.289 μg L-1 was obtained. The proposed sensor demonstrated good precision (relative standard deviation = 4.02%) at a Se4+ concentration of 5 μg L-1. Moreover, the proposed sensor was applied to analyze Se4+ in wastewater samples that were spiked with Se, and it achieved good recovery values.

Electroplating Kinetic of Nanostructured Selenium Films from Citrate Bath

Electrodeposition of silver selenide thin films from aqueous solutions

Electrodeposition of Tin Selenide from Oxalate-Based Aqueous Solution

Electrodeposition of tin, selenium, and tin-selenium compound in the choline chloride-glycerol deep eutectic solvent

Electrochemical Preparation of Silver Selenide Films and Nanowires from Aqueous Solutions

Deposition of Sb2Se3 thin films on Pt substrate via electro-chemical atomic layer epitaxy (EC-ALE)

Co-electrodeposited Ag2SnS3/Mo thin films: optical and electrochemical study: DFT complement

The effect of selenium ions concentration on zinc selenide thin films prepared by photo-assisted chemical bath deposition method

Electrochemistry of Selenium with Sodium and Lithium: Kinetics and Reaction Mechanism

Electrochemical and X-ray Photoelectron Spectroscopic Study of Early SEI Formation and Evolution on Si and Si@C Nanoparticle-Based Electrodes

In-Depth Study of Chemically Electrodeposited Cuprous Oxide (Cu2O) thin Films on ITO Glass

Characterization of Bi2Se3 prepared by electrodeposition

Facile Synthesis of Carbon Nanospheres with High Capability to Inhale Selenium Powder for Electrochemical Energy Storage

A facile solution-phase deposition approach to porous selenium materials

A Study of Different Selenium Sources in the Synthesis Processes of Chalcopyrite Semiconductors

Electrodeposition of Sb2Se3 on Indium-Doped Tin Oxides Substrate: Nucleation and Growth

Voltammetric and impedimetric determinations of selenium(iv) by an innovative gold-free poly(1-aminoanthraquinone)/multiwall carbon nanotube-modified carbon paste electrode

Efficient Sodium Storage in Selenium Electrodes Achieved by Selenium Doping and Copper Current Collector Induced Displacement Redox Mechanisms

Efficient selenate removal from impaired waters with TiO2-assisted electrocatalysis

CoSe 2 -decorated carbon nanofibers: A catalytic electrode for uniform Li 2 Se nucleation in lithium-selenium batteries

Electrodeposition of Cu2NiSnS4 absorber layer on FTO substrate for solar cell applications