Abstract:Silicon represents one of the most promising anode materials for next generation lithium-ion batteries. However its colossal volume expansion (up to 300%) upon electrochemical reaction with lithium repeatedly exposes fresh surfaces to electrolyte solvent oxidation. This leads to very high irreversible capacities 1 . Deeper insight into these degradation phenomena is critical to engineer adequate electrodes and/or electrolytes. Little is known about the SEI’s morphology at the particle scale. Attempts to characterize this system through transmission electron microscopy (TEM) have been severely limited by the radiolysis and sputtering damage respectively undergone by the SEI and lithium-silicon alloys (Li x Si). In this work we demonstrate the possibility to map major SEI phases 2 as well as quantifying Li x Si compositions 3 and Si crystallinity from a single dataset by combining scanning transmission electron microscopy and low-loss electron energy loss spectroscopy 2 (STEM-EELS) 4 . The protocol we developed allows for large spectrum image acquisitions within short timeframes (~10 ms/voxel), making this method a robust and practical diagnostics tool for battery electrodes and other beam-sensitive nanostructured systems. Results on silicon nanoparticle (SiNP)-based electrodes shed light on the SEI’s deposition mechanism and morphological as well as chemical evolution along cycling (figure 1). Revealing the morphology of lithium fluoride (LiF) - large chunk-like deposits, lithium carbonates (such as Li2CO3) - thin conformal layers and carbon black allows us to get unprecedented insight into the SEI's formation mechanism at the particle scale, while mapping lithium content in Li-Si alloys shed light on the lithiation mechanisms at the particle and aggregate scale. Strong correlations between the SEI's local chemistry and our nanoparticles cycling performances were observed. Alloy formation appeared to make particles fuse together into what became a-Si/c-Si composite networks after delithiation (figure 2d), as revealed through careful examination of the EELS low-loss data. Furthermore, lithiation is shown to proceed in a very heterogeneous manner on the aggregate and particle scale, with particles at the aggregate/porosity boundary exhibiting higher lithium content (figure 2e), pristine and lithiation particles side to side (figure 2a), and composition gradients across single shells. Lithiation was also observed to proceed preferentially along grain boundaries (figure 2c), resulting in different behaviours between mono- and polycrystalline silicon powders, with polycristalline silicon showing higher lithium contents on average in charged electrodes. These tools were used to study the influence of the electrolyte solvent on the SEI's morphology and chemistry along cycling. Observations from electrodes cycled in pure carbonate electrolyte (1M LiPF6 in EC:DMC 1:1 + 10%FEC) at the 1st, 10th and 100th cycle were obtained and show clear trends in SEI accumulation and chemical evolution. These insights into both the SEI and the behavior of SiNPs are an exceptional asset in understanding the rapid capacity decay of silicon-based electrode. Reference s : [1] Delpuech, N.; Dupre, N.; Moreau, P.; Bridel, J.-S.; Lestriez, B.; Guyomard, D. ChemSusChem 2016. [2] Yakovlev, S.; Libera, M. Micron 2008, 39 (6), 734–740. [3] Danet, J.; Brousse, T.; Rasim, K.; Guyomard, D.; Moreau, P. Phys. Chem. 2010, 12 (1), 220–226. [4] Boniface, M., Quazuguel, Guyomard, D., Moreau, P., & Bayle-Guillemaud, P. (2016). Nano Letters. Figure 1

Electrochemical and X-ray Photoelectron Spectroscopic Study of Early SEI Formation and Evolution on Si and Si@C Nanoparticle-Based Electrodes

Carbon Coating Influence on the Formation of Percolating Electrode Networks for Silicon Anodes

Composition-Nanoarchitecture-Performance Analysis of High Energy Density Electrodeposited Silicon for Lithium-Ion Battery Anodes

Chemical Analysis of High Energy Density Electrodeposited Silicon Anodes for Lithium-Ion Batteries

Solid Electrolyte Interphase Layer Formation on the Si-Based Electrodes with and without Binder Studied by XPS and ToF-SIMS Analysis

A Well-Defined Silicon Nanocone-Carbon Structure for Demonstrating Exclusive Influences of Carbon Coating on Silicon Anode of Lithium-Ion Batteries

Study and modeling of the Solid Electrolyte Interphase behavior on nano-silicon anodes by Electrochemical Impedance Spectroscopy

SEI-component formation on sub 5 nm sized silicon nanoparticles in Li-ion batteries: the role of electrode preparation, FEC addition and binders

A Design Strategy of Carbon Coatings on Silicon Nanoparticles as Anodes of High-Performance Lithium-Ion Batteries

How carbon coating or continuous carbon pitch matrix influence the silicon electrode/electrolyte interfaces and the performance in Li‐ion batteries

(Invited) Evolution of the Solid Electrolyte Interphase in Si Nanoparticle Based Li-Ion Battery Anodes: Insights from Ab Initio Simulations of Core-Level Spectroscopies

Toward the Improvement of Silicon-Based Composite Electrodes via an In-Situ Si@C-Graphene Composite Synthesis for Li-Ion Battery Applications

Adapting Simultaneous in Operando Electrochemical Quartz Crystal Microbalance and Electrochemical Impedance Spectroscopy to Studies of Solid Electrolyte Interface Layer Formation on Amorphous Silicon Anodes

(Invited) Advanced Photoelectron Spectroscopy on Battery Materials: Lessons Learnt on Silicon- Containing Electrodes

Study of Lithiation Mechanisms of High Performance Carbon-Coated Si Anodes by In-Situ Microscopy

Influence of the Silicon-Carbon Interface on the Structure and Electrochemical Performance of a Phenolic Resin-Derived Si@C Core-Shell Nanocomposite-Based Anode

In-situ Study of Surface Structure Evolution of Silicon Anodes by Electrochemical Atomic Force Microscopy

Nanoscale Chemical Evolution of Silicon Negative Electrodes Characterized By Low-Loss STEM-Eels

Identification of the Solid Electrolyte Interface on the Si/C Composite Anode with FEC as the Additive

Impact of Surface Chemistry of Silicon Nanoparticles on the Structural and Electrochemical Properties of Si/Ni3.4Sn4 Com-posite Anode for Li-Ion Batteries

Solid-Electrolyte Interphase Reinforcement Strategy Through Introducing Covalently Anchored Multi-Functional Components for Li-Alloy Anodes