Abstract:Aluminum alloys are extensively used to manufacture mechanical components. However, when exposed to alkaline environments, like lubricants, refrigerants, or detergents, they can be corroded, reducing their durability. For this reason, the aim of this study is to investigate the influence of aggressive alkaline solutions (i.e., pH and presence of chlorides) on the corrosion resistance of three aluminum alloys (AA 5083-H111, AA 6082-T6, and AA 7075-T6) with and without anodizing treatments. Open circuit potential (EOCP) and anodic polarization measurements were carried out and typical corrosion parameters such as corrosion current density (icor) and corrosion rate (CR) were determined. Morphology of the corrosion attack and samples microstructure were investigated by scanning electron microscope. Results show that corrosion behavior of the three investigated alloys is influenced by (i) the aggressiveness of the testing environments; (ii) the thickness of the anodizing treatment; (iii) the alloy chemical composition; (iv) the distribution of intermetallic phases in the aluminum matrix. Moreover, three galvanic series have been built also testing other metallic alloys commonly used in mechanical applications, i.e., carbon steel (C40), stainless-steel (AISI 304), and Cu-based alloys (Cu-Ni alloy and CW 617 N, respectively). Results clearly indicate that galvanic series play a fundamental role when it is necessary to select an alloy for a specific environment, highlighting the thermodynamic conditions for corrosion occurrence. On the other hand, kinetic measurements and microstructural studies carried out on the three aluminum alloys stress the importance of the surface treatments and relevant thickness as well as the effect of metal exposure. Future work will involve the study of other surface treatments on aluminum alloys and the evaluation of their corrosion behavior in acidic environments.

Analysis and calculation of corrosion rate of aluminum alloy in nitric acid solution

An electrochemical study on corrosion behavior of three alloys in artificial saliva with different pH

The Effect on the Corrosion Resistance of Ti Alloy in the Artificial Saliva with Different pH Value

Electrochemical Noise Study on 2024-T3 Aluminum Alloy Corrosion in Simulated Acid Rain under Cyclic Wet–dry Condition

In Situ Electrochemical Monitoring of the Crevice Corrosion Process of the 7075-T651 Aluminium Alloy in Acidic NaCl and NaNO3 Solution

Corrosion Behavior of Homogenized and Extruded 1100 Aluminum Alloy in Acidic Salt Spray

Computational and Experimental Insights into the Role of Acidic Molecules on the Corrosion Behavior on 7A46 Aluminum Alloy

Predicting Galvanic Corrosion of Aluminum Using Accelerated Laboratory Electrochemical Experiments

EIS Study on 2024-T3 Aluminum Alloy Corrosion in Simulated Acid Rain under Cyclic Wet-Dry Conditions

Corrosion Behavior of Aluminum-Silicon-Copper-Manganese Alloy in Sulfuric Acid Medium

Study on the Corrosion Behavior and Mechanism of 6061 Aluminum Alloy under Alternating Current Interference in 3.5% NaCl Solution

Corrosion Behavior of Aluminum Alloys in Different Alkaline Environments: Effect of Alloying Elements and Anodization Treatments

Exfoliation Corrosion of Aluminum Alloy AA7075 Examined by Electrochemical Impedance Spectroscopy

Improving the Corrosion Resistance of Aluminum Alloys by Cathodic Polarization in Aqueous Media

ELECTROCHEMICAL FEATURES OF THE CORROSION OF AN ALUMINUM-LITHIUM ALLOY IN 3.0% NaCl SOLUTION

Fatigue Corrosion Behavour of 2024-T3 Aluminum Alloy with 4 Surface Protective Coatings

Investigation on AC corrosion of aluminum alloy sacrificial anode in the artificial simulated seawater environment

The Relationship of High Strength Aluminum Alloy Corrosion Behavior and Corrosion Environment

Corrosion Behavior of Extrusion, Under-Aged, Peaked-Aged and Over-Aged We93 Alloys in Nahso3 Solutions

Effect of temperature on galvanic corrosion of Al 6061-SS 304 in nitric acid

Corrosion characteristics and prediction model of aluminum alloys in saturated Na2SO4 solution