Abstract:As computational fluid dynamics (CFD) advances, entropy generation minimization based on CFD becomes attractive for optimizing complex heat-transfer systems. This optimization depends on the accuracy of CFD results, such that accurate turbulence models, such as elliptic relaxation or elliptic blending turbulence models, become important. The performance of a previously developed elliptic blending turbulence model (the SST k-ω-φ-α model) to predict the rate of entropy generation in the fully developed turbulent circular tube flow with constant heat flux was studied to provide some guidelines for using this class of turbulence model to calculate entropy generation in complex systems. The flow and temperature fields were simulated by using a CFD package, and then the rate of entropy generation was calculated in post-processing. The analytical correlations and results of two popular turbulence models (the realizable k-ε and the shear stress transport (SST) k-ω models) were used as references to demonstrate the accuracy of the SST k-ω-φ-α model. The findings indicate that the turbulent Prandtl number (Prt) influences the entropy generation rate due to heat-transfer irreversibility. Prt = 0.85 produces the best results for the SST k-ω-φ-α model. For the realizable k-ε and SST k-ω models, Prt = 0.85 and Prt = 0.92 produce the best results, respectively. For the realizable k-ε and the SST k-ω models, the two methods used to predict the rate of entropy generation due to friction irreversibility produce the same results. However, for the SST k-ω-φ-α model, the rates of entropy generation due to friction irreversibility predicted by the two methods are different. The difference at a Reynolds number of 100,000 is about 14%. The method that incorporates the effective turbulent viscosity should be used to predict the rate of entropy generation due to friction irreversibility for the SST k-ω-φ-α model. Furthermore, when the temperature in the flow field changes dramatically, the temperature-dependent fluid properties must be considered.

Numerical Modeling of Freestream Turbulence Decay Using Different Commercial Computational Fluid Dynamics Codes

Effects of numerical method of source terms in turbulence models

Numerical Study of Entropy Generation in Fully Developed Turbulent Circular Tube Flow Using an Elliptic Blending Turbulence Model

Analyzing the Turbulent Flow Characteristics by Utilizing k-? Turbulence Model.

A Scale-Adaptive Turbulence Model Based on the k-Equation and Recalibrated Reynolds Stress Constitutive Relation

A Comparative Analysis of Different Turbulence Models for Simulating Complex Turbulent Separated Flows over Cubic Geometries

Modelling Flow Transition in a Hypersonic Boundary Layer with Reynolds-averaged Navier-Stokes Approach

A new turbulence model based on scale decomposition

Development of K-R Turbulence Model for Wall -Bounded Flows

Reynolds stress decay modeling informed by anisotropically forced homogeneous turbulence

Investigation of Velocity Distribution and Turbulence Characteristics in Subcritical Circular Open Channel Flows Using a Modified Reynolds Stress Model

Numerical Simulation of the Neutral Equilibrium Atmospheric Boundary Layer Using the SST K-Ω Turbulence Model

Study of Numerical Method for Flow Transition Prediction Based on Turbulence Model

Numerical and Experimental Analysis of Shallow Turbulent Flow over Complex Roughness Beds

Transition Study of 3D Aerodynamic Configures Using Improved Transport Equations Modeling

Computational fluid dynamics analysis of cyclist aerodynamics: performance of different turbulence-modelling and boundary-layer modelling approaches

Numerical Aerodynamic Analysis of Bluff Bodies at a High Reynolds Number with Three-Dimensional CFD Modeling

Numerical Simulation of Flow Around Square Cylinder Using Different Low-Reynolds Number Turbulence Models

A TVD Scheme for Incompressible Flow Coupled with Different Turbulence Modles on A Ground-Mounted Square-RIB Flow

Large Eddy Simulation of Flow Past a Square Cylinder Based on Dynamic Sub-Grid Scale Models

Numerical Investigation on Two-Dimensional Boundary Layer Flow with Transition