Abstract:This paper presents experimental results on the behavior of a class of glass fiber composites under low velocity impacts, in order to analyze their usage in designing low velocity impact-resistant components in car and marine industries. Also, a finite element model at the meso level (considering yarn as a compact, homogenous and isotropic material) was run with the help of Ansys Explicit Dynamics in order to point out the stages of the failure and the equivalent stress distribution on the main yarns in different layers of the composite. The composites were manufactured at laboratory scale via the laying-up and pressing method, using a quadriaxial glass fiber fabric (0°/+45°/90°/-45°) supplied by Castro Composites (Pontevedra, Spain) and an epoxy resin. The resin was a two-component resin (Biresin® CR82 and hardener CH80-2) supplied by Sika Group (Bludenz, Austria). The mass ratio for the fabric and panel was kept in the range of 0.70-0.77. The variables for this research were as follows: the number of layers of glass fiber fabric, the impact velocity (2-4 m/s, corresponding to an impact energy of 11-45 J, respectively) and the diameter of the hemispherical impactor (Φ10 mm and Φ20 mm) made of hardened steel. The tests were performed on an Instron CEAST 9340 test machine, and at least three tests with close results are presented. We investigated the influence of the test parameters on the maximum force (Fmax) measured during impact, the time to Fmax and the duration of impact, tf, all considered when the force is falling to zero again. Scanning electron microscopy and photography were used for discussing the failure processes at the fiber (micro) and panel (macro) level. At a velocity impact of 2 m/s (corresponding to an impact energy of 11 J), even the thinner panels (with two layers of quadriaxial glass fiber fabric, 1.64 mm thickness and a surface density of 3.51 kg/m2) had only partial penetration (damages on the panel face, without damage on panel back), but at a velocity impact of 4 m/s (corresponding to an impact energy of 45 J), only composite panels with six layers of quadriaxial fabric (5.25 mm thickness and a surface density of 9.89 kg/m2) presented back faces with only micro-exfoliated spots of the matrix for tests with both impactors. These results encourage the continuation of research on actual components for car and naval industries subjected to low velocity impacts.

Influence of hybridisation on energy absorption of 3D woven composites under low-velocity impact loading. Modelling and experimental validation

Influence of Asymmetric Hybridization on Impact Response of 3D Orthogonal Woven Composites

Numerical modeling and experimental validation of low velocity impact of woven GFRP/CFRP composites

High Velocity Impact Response of 3D Hybrid Woven Composites

Impact Response of Carbon/Kevlar Hybrid 3D Woven Composite under High Velocity Impact: Experimental and Numerical Study

Impact Response of 3D Orthogonal Woven Composites with Different Fiber Types

Experimental and numerical investigations on the dynamic response of woven carbon fiber reinforced thick composite laminates under low-velocity impact

Low-velocity impact and quasi-static post-impact compression analysis of woven structural composites for automotive: Influence of fibre types and architectural structures

Impact Performance of 3D Orthogonal Woven Composites: A Finite Element Study on Structural Parameters

Low-velocity impact response of 3D woven hybrid epoxy composites with carbon and heterocyclic aramid fibres

Drop-weight impact behaviour of woven hybrid basalt–carbon/epoxy composites

Investigation on Layer Hybridization of Glass/Carbon Fibre Woven Reinforced Composites Subjected to Low-Speed Impact

An experimental investigation on the influence of weave architectures on out-of-plane and in-plane impact properties of 3D woven fabric-reinforced composites

Experimental investigation on response and failure modes of 2D and 3D woven composites under low velocity impact

Hybrid woven carbon-Dyneema composites under drop-weight and steel ball impact

The Behavior of Glass Fiber Composites under Low Velocity Impacts

Experimental and numerical response and failure of laterally impacted carbon/glass fibre-reinforced hybrid composite laminates

Experimental study of the importance of fibre breakage on the strength of thermoplastic matrix composites subjected to compression after impact

Experimental and Numerical Analysis of Lightweight Hybrid Composites Under Low Velocity Impact

Energy absorption from composite reinforced with high performance auxetic textile structure

Low-velocity impact response of 3D woven solid structures for multi-scale applications: role of yarn maneuverability and weave architecture