Design and Operation of Optical Fiber for Mass Measuring Instrument with Bending Power Loss Principle
Saktioto Saktioto,Wahyu Candra,Vepy Asyana,Romi Fadli Syahputra,Syamsudhuha Syamsudhuha,Dedi Irawan,Okfalisa Okfalisa,Haryana Hairi,Dadang Syarif Shihabudin Sahid
DOI: https://doi.org/1013.9980.7371ec6b-423e-41f0-8c81-a74dcd91ea08.1624559198
2021-06-25
Indonesian Journal of Electrical Engineering and Informatics
Abstract:Utilization fiber optics macro-bending will be useful for non-destructive applications, such as a mass measurement device. This research, therefore, analyzes the fiber optic power loss due to macro bending by mass loading and explores its possible application as an instrument of mass scale. A single-mode fiber (SMF) with a core diameter of 8.2μm and laser with a wavelength of 1310 nm and 1550 nm are used in this work. Moreover, an optical power meter with a sensitivity of 0.01dBm is applied as the detector while power loss is determined using nine bending cylinders that can produce eighteen bends with a roundtrip system. It is obtaineda correlation coefficient R 2 of 0.9910 and 0.9959 corresponding to a sigmoid of 4 parameters for two-wavelength sources of 1310nm and 1550nm, respectively. The results showed mass suppression can produce a power loss with a relatively small error of 19.60%, 11.23%, 0.20%, 3.74%, and 9.36% for mass 300g, 600g, 100 g, 1400g, and 1800g, respectively