Abstract:Bubble nucleation and growth to confinement during flow boiling in microchannels lead to high heat transfer coefficients. They may also create pressure fluctuations that change the superheat driving evaporation and cause flow reversals that promote transient dry-out and uneven distribution of flow between parallel channels. The work described in this paper is part of a programme to develop models for these processes that will aid the design of evaporative cooling systems for devices operating at high heat fluxes. Video observations of water boiling in a single copper channel of rectangular cross-section, 0.38 × 1.6 mm and a heated length 40 mm, were performed. The top side of the channel was a glass window. Results are presented for a heat flux, averaged over the area of the three metal sides, of 210 and 173 W/m2K for incompressible and compressible inlet flow conditions. The inlet pressure was about 1.12 bar and the mass flux was 747.5 kg/m2s for both conditions examined. The results demonstrated the strong influence of compressibility on the mode of bubble detachment and growth and therefore on flow patterns, pressure fluctuations and heat transfer rates. The fluid mechanics of boiling in this size channel were also successfully investigated by 3-D numerical simulation for bubbles growing at a defined rate with a fixed inlet flow rate using the 3-D CFD code FLUENT 6 (no upstream compressibility). The study examined the fluid mechanics of bubble motion with heat transfer, but the mass transfer across the bubble-liquid interface was not simulated in the present work. A small vapour bubble was injected at the wall to ensure the bubble generation is under a quasi nucleation condition. Its growth was driven by an internal source of vapour, at a rate derived by analysis of the experimental measurements of growth. The simulation reproduced well the observed motion and shape of the bubble. The simulation was then extended to model bubbles generated and growing randomly in a 2-D channel.

Visualization of Flow Boiling Experiments on Micro/Nanoscale Structured Surfaces in Microchannel

Visualization of Flow Patterns and Bubble Behavior During Flow Boiling in Open Microchannels

Heat Transfer Characteristics and Flow Pattern Visualization for Flow Boiling in a Vertical Narrow Microchannel

Visual Study of Flow Pattern Evolution of Flow Boiling in A Microtube

Visualization Study on Bubble Dynamical Behavior in Subcooled Flow Boiling under Various Subcooling Degree and Flowrates

Experimental Study on Visualized Flow Boiling in a Narrow Rectangular Channel

Heat transfer, pressure drop and flow patterns of flow boiling on heterogeneous wetting surface in a vertical narrow microchannel

Experimental and Numerical Study on Nucleate Bubble Deformation in Subcooled Flow Boiling

Experimental Investigation on Submerged Gas-Liquid Mixture Injection into Water Through A Micro-Channel

Experimental Study Of Saturated Flow Boiling In Vertical Narrow Microchannel

Experimental Study of Flow Boiling Regimes Occurring in a Microfluidic T-Junction

3-D numerical study of subcooled flow boiling in a horizontal rectangular mini-channel by VOSET

Experimental Study on Local Subcooled Flow Boiling Heat Transfer in A Vertical Mini-Gap Channel

Investigation on visualization and heat transfer performance study of the mini-channel flow boiling

Numerical investigation of the bubble growth in horizontal rectangular microchannels

Numerical Simulation and Experimental Observations of Confined Bubble Growth During Flow Boiling in a Microchannel with Rectangular Cross-Section of High Aspect Ratio

Investigation of Bubble Behavior in Subcooled Flow Boiling of Water in a Horizontal Annulus Using High-Speed Flow Visualization

Flow map and measurement of void fraction and heat transfer coefficient using an image analysis technique for flow boiling of water in a silicon microchannel

Analyses of Bubble Dynamics in Subcooled Boiling Flow Using Euler-Lagrange Method

Oscillations During Flow Boiling in Single Microchannels