Abstract:The surface morphology and structure of zinc oxide thin films play a key role in many applications such as chemical sensors and photocatalysts. In this study, ZnO thin films are prepared on Si/SiO2 substrates by spin-coating sol–gel technique. New element in the films preparation is the application of drying with hot air flow (Th= 90–95 °C), as first step of the drying procedure, followed by furnace drying as second step. It is shown that hot air drying has significant influence on the films properties. It reduces the internal stress, strongly affects the films surface morphology, gives assistance to the effusion of organic remains and results in a better crystallinity and lower defect density in the as-prepared films when compared with the films prepared by furnace drying only. Besides, first data on the modification of sol–gel ZnO films by post-deposition irradiation with a nanosecond infrared laser are obtained, giving an alternative to the standard furnace annealing. They indicate that laser irradiation of as-prepared ZnO films gives rise to certain improvement in crystal structure and slight increase in crystallite size, followed by the increase of micro-strain. It also reduces the number of defects playing role of non-radiative recombination centers, as well as the size and density of small cracks and pores on the surface of as-prepared films. Left: X-ray diffraction patterns of as-prepared and annealed at 400 °C ZnO films prepared by furnace drying only, the patterns are taken on non-irradiated and laser-irradiated films. Middle: Experimental and fitted E2high Raman mode in the spectra of non-irradiated and laser-irradiated samples prepared by two-step drying, as - the asymmetry fitting parameter. Right: Optical and AFM surface images of annealed ZnO films prepared by one-step drying; the AFM images were obtained at two different scales.

Effects of spin coating parameters on stress, electrical and optical properties of multilayer ZnO thin film prepared by sol–gel

Effect of Nucleation and Growth Kinetics on the Electrical and Optical Properties of Undoped ZnO Films

The growth of nanoscale ZnO films by pulsed-spray evaporation chemical vapor deposition and their structural, electric and optical properties

The Effects of Oxygen Partial Pressure and Substrate Temperature on the Structural and Optical Properties of Zno Films

Effect of solution concentration on surface morphology, optical properties and solar light response of ZnO thin films

Effect of Solution Concentrations on Crystal Structure, Surface Topographies and Photoluminescence Properties of ZnO Thin Films

Influence of water content in mixed solvent on surface morphology, wettability, and photoconductivity of ZnO thin films.

Surface Morphology and Optical Properties of Na-doped ZnO Thin Films

Deposition and Characterization of AZO Thin Films on Flexible Glass Substrates Using DC Magnetron Sputtering Technique

Investigation on the Structural and Optical Properties of ZnO Thin Films Prepared by Sol-Gel Method

Effect of film thickness on structural and optical properties of sol-gel spin coated aluminum doped zinc oxide (Al:ZnO) thin films

Structural and Optical Properties of ZnO Thin Films Prepared by Sol–gel Method with Different Thickness

Influences of Processing Parameters on the Properties of Zno Thin Films Prepared by Sol-Gel Spin-Coating

Effect of the ZnO buffer layer thickness on AZO film properties

Sol-Gel Preparation of Ag/ZnO Films and Their Electrical and Optical Properties

Laser-Assisted Spin Coating of Al-Doped ZnO thin Films

Investigation of the Doping and Withdrawal Speed Effect on the Properties of sol–gel Dip-coated Cu-Doped ZnO Thin Films

The Impact of Spinning Speed on n-TiO2/ZnO Bilayer Thin Film Fabricated through Sol–Gel Spin-Coating Method

Conductive and optically transparent sol–gel spin coated Al3+ and Sn4+ doped ZnO nano-crystalline thin-films

Optical properties of spin coated Cu doped ZnO nanocomposite films

Modification of surface morphology and lattice order in nanocrystalline ZnO thin films prepared by spin-coating sol–gel method