Abstract:Butt joints of zircaloy-4 were made using electron beam (EB) welding. The effect of beam current (15–20 mA) on weld zone size, microstructure, porosity, mechanical and corrosion properties has been investigated. Local temperature and cooling rate were estimated, and the average cooling rate increased from 2.4 to 6.3°C ms –1 with a decrease in beam current in the said range. Joints prepared at lower beam current possessed smoother weld surface, narrow weld bead, and fine lamellar type widmanstätten structure in the fusion zone (FZ). The length of the α-Zr lamella (from 105 to 37 μm) and interlamellar space (from 0.8 to 0.3 μm) decreased with a decrease in beam current. The XCT result revealed that porosity increased with an increase in beam current, and large-size micro pores of 180 μm were present in joints prepared at high beam current. The hardness of the welded samples increased by 13–20% than the base metal. The joint prepared with a low beam current possessed higher ductility (29%) and a minimum corrosion rate (0.0085 mmpy in 3.5 wt-% of NaCl solution) than the joint made with a higher beam current. On a fabriqué des joints bout à bout en zircaloy-4 en utilisant le soudage par faisceau électronique (EB). On a investigué l'effet du courant du faisceau (15–20 mA) sur la taille de la zone de soudure, la microstructure, la porosité et les propriétés mécaniques et de corrosion. On a estimé la température locale et la vitesse de refroidissement, et la vitesse de refroidissement moyenne augmentait de 2.4°C/ms à 6.3°C/ms avec une diminution du courant du faisceau dans la plage donnée. Les joints préparés à un courant de faisceau inférieur possédaient une surface de soudure plus lisse, un cordon de soudure étroit et une structure Widmannstätten de type lamellaire fine dans la zone de fusion (FZ). La longueur de la lamelle de Zr-α (de 105 μm à 37 μm) et de l'espace interlamellaire (de 0.8 μm à 0.3 μm) diminuaient avec une diminution du courant du faisceau. Le résultat de XCT a révélé que la porosité augmentait avec l'augmentation du courant du faisceau et que des micropores de grande taille de 180 μm étaient présents dans les joints préparés au courant de faisceau élevé. La dureté des échantillons soudés a augmenté de 13 à 20% par rapport au métal de base. Le joint préparé avec un courant de faisceau faible possédait une ductilité plus élevée (29%) et un taux de corrosion minimum (0.0085 mm/an dans une solution à 3.5% en poids de NaCl) par rapport au joint fabriqué avec un courant de faisceau plus élevé.

Effect of heat input on microstructure, mechanical and corrosion properties of electron beam welded zircaloy-4 sheets

Effect of beam current on microstructure, tensile properties and corrosion behaviour of electron beam welded zircaloy-4 joints

Effect of Heat Input on Microstructure and Properties in Heat Affected Zone of Astm A572 Gr.65 Steel

Effect of Heat Input on Microstructure and Mechanical Properties of Ti/Cu66V34/Cu Joints by Electron Beam Welding

Effect of heat input on mechanical properties of electron beam welded joint of TiAl based alloy

Effect of Heat Distribution on Microstructure and Mechanical Properties of Electron Beam Welded Dissimilar TiAl/TC4 Joint

Effect of Heat Input on Microstructure and Corrosion Resistance of X80 Laser Welded Joints

Effect of Heat Input on the Microstructure and Mechanical Properties of Electron Beam-Welded AW2099 Aluminium-Lithium Alloy

The effect of heat input on weld-bead geometry, mechanical, phase transformation temperature, and corrosion properties of autogenous double pulse TIG welded nitinol sheets

Effect of heat input on microstructure and mechanical properties of laser welded joint of Inconel 617 nickel-based superalloy

Effects of heat input on microstructure evolution, mechanical and corrosion properties of TC4 alloy by keyhole TIG welding

Effect of heat input on the mechanical and metallurgical aspects of double-pulse MIG welded IN 617

Study of Heat Input Effects on the Microstructure of Lean Duplex 2101 Shielded Metal Arc Weld and Its Effect on Mechanical Properties, Corrosion, and Scratch Behavior

Effect of Heat Input on the Microstructures and Mechanical Properties of Laser Welded Ti2AlNb Alloys

Effect of Heat Input Conditions on Microstructure and Mechanical Properties of Friction-Stir-Welded Pure Copper

Effect of heat input on microstructure and mechanical properties of IC10 Ni3Al-based superalloy electron beam welding joint

Effect of Heat Input on Microstructure and Properties of Laser-Welded 316L/In601 Dissimilar Overlap Joints in High-Temperature Thermocouple

Heat treatment and heat input effects on the dissimilar laser beam welded AISI 904L super austenitic stainless steel to AISI 317L austenitic stainless steel: Surface, texture, microstructure and mechanical properties

Effect of Heat Input on Microstructure and Mechanical Properties of Laser Welded Medium Mn Steel Joints

Expression of Concern: Effect of Heat Treatment on the Properties of Electron Beam Welded Joint of First Wall

On the Heat-Affected Zone Role for Mechanical Properties of Structural-Steel MIG and CMT–MIG Weldments