Experimental Study on the Effects of Stress-Induced Damage on the Microstructure and Mechanical Properties of Soft Rock

Hao Wang,Yong-Yan Wang,Zhuo-Qun Yu,Jian-Guang Li

DOI: https://doi.org/10.1155/2021/6696614

IF: 1.843

2021-01-31

Advances in Civil Engineering

Abstract:After rocks are damaged under stress loading, the changes of their microstructural and mechanical properties are major factors that affect construction safety in geotechnical engineering projects. Studying the microstructures and mechanical behaviors of stress-damaged rocks can help better guide construction and reduce construction risks for geotechnical engineering projects. In this study, a sandstone was first artificially predamaged and then subsequently subjected to scanning electron microscopy (SEM) analysis, computed tomography (CT) scanning, and uniaxial compression testing. Afterwards, the rock microstructures were three-dimensionally (3D) reconstructed, and the pores were classified and characterized based on their diameters. Moreover, the microstructural and mechanical parameters of the rock were subjected to significance analysis. The results showed that as the stress-induced damage ( σ i ) increased, the uniaxial compressive strength ( σ c ) of the soft rock decreased by 13.7–31.8%; as σ i increased from 11.2 to 19.6 MPa, the elastic modulus (E) of the soft rock increased by up to 28.8%; and as σ i increased beyond 19.6 MPa, there was a significant (22.3%) decrease in E. Stress-induced damage significantly affected the spatial distribution of the pores’ structure of the soft rock. Changes in the spatial structure of the pores led to the formation of cracks. The microstructural parameters of the stress-damaged soft rock were correlated with its mechanical parameters.

construction & building technology,engineering, civil

What problem does this paper attempt to address?

This paper aims to study the influence of stress - induced damage on the microstructure and mechanical properties of soft rocks. Specifically, the author analyzed the influence of stress damage on the pore structure and mechanical behavior of sandstone samples through experimental methods such as scanning electron microscopy (SEM), computed tomography (CT) and uniaxial compression tests. The main objectives of the study are: 1. **Quantify the influence of stress damage on the microstructure of soft rocks**: Obtain microstructure images of damaged rocks through SEM observation and CT scanning, and perform three - dimensional reconstruction to analyze the spatial distribution of pores and its changes. 2. **Evaluate the influence of stress damage on the mechanical properties of soft rocks**: Measure the uniaxial compressive strength (\(\sigma_c\)) and elastic modulus (\(E\)) of rocks at different stress levels through uniaxial compression tests, and explore the specific influence of stress damage on these mechanical parameters. 3. **Establish the relationship between microstructure and mechanical properties**: Explore the correlation between microstructure parameters of rocks (such as the number of pores, porosity, the proportion of different types of pores, etc.) and mechanical property parameters (such as \(\sigma_c\) and \(E\)) through statistical analysis. Through these studies, the author hopes to provide references for rock damage assessment and damage evolution mechanisms in geological engineering, thereby improving construction safety and reducing the risks of geological engineering projects.

Experimental Study on the Effects of Stress-Induced Damage on the Microstructure and Mechanical Properties of Soft Rock

Experimental Study on Mechanical Behavior, Fracture Characteristics, and Acoustic Emission Damage Characteristics of Sandstone Under Triaxial Multistage Stress Disturbance

Dynamic tensile behaviour under impact loading for rocks damaged by static precompression

Analysis of Damage and Permeability Evolution of Sandstone under Compression Deformation

Experimental investigation of the strain rate effect on crack initiation and crack damage thresholds of hard rock under quasi-static compression

Experimental mechanical strength and deformation characteristics of deep damaged–fractured rock

Investigations of Damage Characteristics in Rock Material Subjected to the Joint Effect of Cyclic Loading and Impact

Discrete Element Study on the Mechanical Response of Soft Rock Considering Water-Induced Softening Effect

Study on dynamic characteristics of sandstone-damaged by loading and unloading

Experimental study on the bearing mechanical characteristics and deformation failure mechanism of damaged sandy mudstone

Experimental Study on Dynamic Tensile Mechanical Behavior and Fracture Mechanical Characteristics of Sandstone with a Single Prefabricated Fissure

Study on Dynamic Mechanical Properties and Microscopic Damage Mechanisms of Granite after Dynamic Triaxial Compression and Thermal Treatment

The Influences of Natural Structure Damage and Stress Path on Mechanical Behaviors of Soft Clay

Experimental study on mechanical and acoustic emission characteristics of sedimentary sandstone under different loading rates

Experimental investigation of microscopic crack development and damage characteristics of sandstone based on acoustic emission characteristic parameters

Experimental study on the effective stress law and permeability of damaged sandstone under true triaxial stress

Experimental investigation on True Triaxial Deformation and Progressive Damage Behaviour of Sandstone

Dynamic response and constitutive model of damaged sandstone after triaxial impact

Research On Confining Pressure Effect On Mesoscopic Damage Of Rock Salt Based On Ct Scanning

Deformation characteristics and damage ontologies of soft and hard composite rock masses under impact loading

Dynamic Response and Damage Regularity of Sandstone with Different Moisture States under Cyclic Loading