Abstract:In the current study, a series of laboratory triaxial loading and unloading experiments were conducted for the purpose of comprehensively understanding the effects on sandstone of loading processes under axial stress conditions and unloading processes under confining pressure conditions. The mechanical properties and crack propagation behaviors of sandstone specimens were analyzed. In addition, a new damage variable based on crack evolution was proposed. The experimental results showed that the strain-softening modulus of the sandstone specimens under triaxial loading and unloading compression conditions decreased with the increases in the loading rate. Meanwhile, the elastic modulus was only observed to undergo small changes. This study found that with the increases in the loading rates of axial stress, the deformation and strength levels of the sandstone specimens also increased. In addition, the crack initiation stress showed a linear increasing trend with the increases in the loading rates of axial stress. The peak crack volumetric strain displayed a slight increase with the loading rate of axial stress, which indicated that the larger the loading rate of axial stress on the sandstone specimens was, the smaller crack propagation strain levels at the peak stress levels would be. The crack propagation velocities were observed to be larger when the loading rates of axial stress were higher. Also, at the same loading rate of axial stress, the crack propagation velocity corresponding to the peak stress of the volumetric cracks was the largest, followed by radial cracks. The crack propagation velocity of the axial cracks was determined to be the smallest. In this study, a new crack damage variable based on crack volumetric strain was proposed. According to the evolution of the crack damage variables of the sandstone specimens, the following four stages of the failure process were obtained: original damage stage; elastic stage; linear damage stage; and accelerated damage stage. The results obtained in this research study provided an important scientific basis for the support of future designs and safety protection measures in underground mining operations.

Experimental study on the effective stress law and permeability of damaged sandstone under true triaxial stress

Analysis of Damage and Permeability Evolution of Sandstone under Compression Deformation

Experimental and Numerical Investigation of Permeability Evolution with Damage of Sandstone under Triaxial Compression

Effect of damage on gas seepage behavior of sandstone specimens

Experimental study on the anisotropy of the effective stress coefficient of sandstone under true triaxial stress

Study on Hydro-Mechanical Coupling Failure and Permeability Enhancement Mechanisms for Sandstone with T-Shaped Fractures

Experimental Study on the Dilatancy Characteristics and Permeability Evolution of Sandstone under Different Confining Pressures

Experimental and numerical investigations on the mechanical behavior of sandstone subjected to gas undrained triaxial compression

Mechanical Behaviors of Low-Permeability Sandstone under the Coupled Elastoplastic Damage and Evolved Gas Permeability

Experimental study on the mechanical properties, acoustic emission characteristics, and permeability evolution of sandstone under triaxial hydromechanical coupling

Experimental investigation on True Triaxial Deformation and Progressive Damage Behaviour of Sandstone

Experimental investigation on the stress-dependent permeability of post-failure sandstone under loading–unloading conditions

Dilatancy behaviour and permeability evolution of sandstone subjected to initial confining pressures and unloading rates

Nonlinear Mechanical and 3D Rupture Morphology of Saturated Porous Sandstone Under True Triaxial Stress

Effect of Triaxial Loading and Unloading on Crack Propagation and Damage Behaviors of Sandstone: An Experimental Study

Experimental Study on Deformation Behavior and Permeability Evolution of Sandstone Responding to Mining Stress

Study on the Evolution of Mechanical Properties and Acoustic Emission of Medium-Permeability Sandstone under Multi-Level Cyclic Loading Stress Paths

Progressive damage and fracture behavior of brittle rock under multi-axial prestress constraint and cyclic impact load coupling

Study on the influence of pore water pressure on shear mechanical properties and fracture surface morphology of sandstone

Experimental and Numerical Validation of an Effective Stress-Sensitive Permeability Model Under Hydromechanical Interactions

Experimental Study on the Response of Cracked Sandstone to the Intermediate Principal Stress Coupled with Pore Pressure