Abstract:Layered nickel-rich cathodes generally suffer from their unstable surface because of lithium impurities. Thus, building an interface with both high electrochemical stability and electroactivity is essential for the development of cathodes. In this work, a Li0.73Co1–xAlxO2 thin layer was successfully coated on pristine LiNi0.8Co0.15Al0.05O2 (NCA) spheres by the reaction of the surface residual lithium with cobalt oxalate nanomaterials. Then, the surface chemical states of NCA were effectively modulated by Li0.73Co1–xAlxO2 coating, including less surface lithium impurities, lower resistance, enhanced ion conductivity, and cycling stability. As a potential cathode material with a higher oxidation potential than that of NCA, Li0.73Co1–xAlxO2 coating plays both roles of an isolation layer and active layer. The advances of Li0.73Co1–xAlxO2 coating may be related to the enhanced covalence property of the Co–O bond and the coexistence of Co4+ and Al3+, which can help to form a stable cathode–electrolyte interface and boost the ion diffusion of the coated NCA cathode. This Li0.73Co1–xAlxO2-modified NCA cathode exhibits a highly competitive performance, such as a capacity of 215.2 mA h g–1 at the initial cycle (0.1 C) and a retention rate of 62.7% after 200 cycles at 5 C. This surface chemical state modulation strategy provides a new possibility of surface engineering with nickel-rich cathodes for high-energy Li-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c05229?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05229</a>.XRD pattern and SEM image of the precursor; Raman spectra of NCA, , and ; HRTEM of pristine NCA; XRD patterns and structure parameters of 1.0 wt % Li0.73Co1–xAlxO2-coated NCA (annealing temperature at 500, 600, and 700 °C); cycling performances of pristine and all experimental samples; full battery cycling test of NCA, , and ; discharge curves of NCA, , and ; XRD patterns of NCA, , and after 200 cycles; experimental design of this work; and calculated relative area of the XPS peaks of NCA, , and (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c05229/suppl_file/sc0c05229_si_001.pdf">PDF</a>).This article has not yet been cited by other publications.

Enhancing the electrochemical performances of LiNi0.8Co0.15Al0.05O2 cathode material by anion/cation co-doping

A cation/anion co-doped Li1.12Na0.08Ni0.2Mn0.6O1.95F0.05 cathode for lithium ion batteries

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Exploring the synergistic effect of Li+ and Br− co-doping on improving the microstructural and electrochemical performances of LiNi0.5Mn1.5O4 cathode materials

Stabilizing Ni‐Rich LiNi 0.92 Co 0.06 Al 0.02 O 2 Cathodes by Boracic Polyanion and Tungsten Cation Co‐Doping for High‐Energy Lithium‐Ion Batteries

Comparison of structural and electrochemical properties of LiNi0.8Co0.15Al0.05O2 with Li site doping by different cations

LiNbO3 Coating and F- Doping Stabilize the Crystal Structure and Ameliorate the Interface of LiNi0.88Co0.06Mn0.03Al0.03O2 to Improve the Electrochemical Properties and Safety Capability

Effect of Cationic (Na+) and Anionic (F−) Co-Doping on the Structural and Electrochemical Properties of LiNi1/3Mn1/3Co1/3O2 Cathode Material for Lithium-Ion Batteries

Effects of chromium/fluorine co-doping on the electrochemical performance of Li1.2Ni0.13Co0.13Mn0.54O2 cathode material for lithium-ion batteries

Cation-doped LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode with High Rate Performance

Insights on the Activation and Stabilization of NCA Cathode Interface: Surface Chemical State Modulations of Aluminum-Mediated Li 0.73 CoO 2 Coatings

Enhanced Electrochemical Performance of the Lithium-Manganese-Rich Cathode for Li-Ion Batteries with Na and F CoDoping

Na and Cl co-doping modified LiNi0.5Co0.2Mn0.3O2 as cathode for lithium-ion battery

Synergistic effect of uniform lattice cation/anion doping to improve structural and electrochemical performance stability for Li-rich cathode materials

Effect of Nb5+ Doping and LiNbO3 Coating on the Structure and Surface of a LiNi0.8Mn0.2O2 Cathode Material for Lithium-Ion Batteries

Structural Reinforcement through High-Valence Nb Doping to Boost the Cycling Stability of Co-Free and Ni-Rich LiNi 0.9 Mn 0.1 O 2 Cathode Materials

Improving Electrochemical Properties by Sodium Doping for Lithium-Rich Layered Oxides

Enhanced Li-ion Intercalation Kinetics and Lattice Oxygen Stability in Single-Crystalline Ni-rich Co-poor Layered Cathodes

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Alkali metal Na+ doped LiNi0.8Co0.1Mn0.1O2 cathode material with a stable structure and high performance for lithium-ion batteries

Improving the single crystal LiNi0.8Co0.1Mn0.1O2 cathode material performance by fluorine doping