Abstract:A nanostructure of lithium-zinc copper ferrite (LiZnCu-Ferrite) prepared experimentally by the auto-combustion method depends on different parameters. The auto-combustion method operates at a temperature (160 °C) suitable for preparing the required nanostructure ferrite phase. The dependent composition was [Li0.5-xZnxCuxFe2.5-xO4 at (x = 0, 0.05, 0.15, 0.25, 0.35, and 0.45)]. A pre-firing at temperature (650 °C) was applied during the calcination process that was suitable to remove unwanted products. The sintering at temperature (800 °C) was suitable for a pelletized shape of ferrite samples. The X-ray diffraction (XRD) pattern showed a spinel structure of ferrite phase produced for all samples under study with the lattice constant in the range (8.345–8.368 Å) as a function of (x). The crystallite size was in the range (18.41–30.27 nm) calculated by the Scherrer method. The transmission electron microscope (TEM) showed a production of nanorods in the size range (10–45 nm) and nanoparticles in the size range (10–40 nm). There was a coincidence between the results of the XRD and TEM analyses. On the other hand, the scanning electron microscope (SEM) showed the surface morphology and the nature of grain size, which was a sign of the presence of nanostructure; it agreed with the XRD analysis. FTIR spectra showed evidence that the system Li0.5-xZnxCuxFe2.5-xO4 had spinal ferrite nanoparticles successfully prepared by sol-gel auto-combustion. A vibrating sample magnetometer (VSM) showed a change in magnetic parameters as compensation factor (x) increased for all composites of LiZnCu-ferrite such as saturation magnetization (Ms), initial magnetic permeability (μi), remanence (Mr), and coercive force (Hc) that measured from M − H loops. A saturation magnetization increased as a function of (x) and recorded a maximum value at (x = 0.15). While the coercivity, initial magnetic permeability (μi), and remanence magnetization enhanced as a function of (x) and recorded a maximum value at (x = 0.45).

Influence of the preparation method and aluminum ion substitution on the structure and electrical properties of lithium–iron ferrites

Synthesis of Nanocrystalline Ferrites Zn0.4ni0.6cr0.5laxfe1.5-Xo4 and Its Magnetic Properties

Study of XRD, dielectric properties and DC electrical conductivity of Li-Zn-Al ferrite synthesized by sol–gel combustion method

Investigation of the structural, magnetic, and dielectric properties of Al-substituted Li-Ni-Mn ferrites

Strong correlation of electrical transport and magnetic properties to ionic states, structure, and morphology of Al-substituted Ni–Co ferrite systems: A comprehensive study

Novel Mn0.5Zn0.5Al0.1MgxLixFe(1.9-x)O4 nanoferrites: synthesis, theoretical cation distribution, and improving their dielectric properties

Effect of Al substitution on the structural, electric and impedance behavior of cobalt ferrite

Preparation and magnetic properties of titanium-substituted LiZn ferrites via a sol-gel auto-combustion process

Sol gel auto combustion method to prepare nanostructures LiZnCu ferrite

Influence of preparation method on structural, optical and magnetic properties of synthesized Zn0.5Mg0.5-xNixFe2O4 nano-ferrite

Synthesis of LiNiO2 cathode materials with homogeneous Al doping at the atomic level

Structural, magnetic, and electrical properties driven by monovalent Li substitution on Bi1−xLixFeO3 (0 ≤ x ≤ 0.1) ferrites

Structural and Electrical Properties of Li Substituted Mg Nano Ferrites: Prepared by Citrate-gel Auto Combustion Method

Quantifying Li-content for compositional tailoring of lithium ferrite ceramics

Effects of metal-ion substitution on the structural, morphological, and electrochemical properties of LiFexZnyMn2−x-yO4 (x, y = 0.25 or 0.75)

Structural, Dielectric, and Electrical Transport Properties of Al3+ Substituted Nanocrystalline Ni-Cu Spinel Ferrites Prepared Through the Sol-Gel Route

Rietveld refinement, cation distribution, morphological and magnetic study of NiAlxFe2-xO4 nanoparticles

Synthesis of New Complex Ferrite Li0.5MnFe1.5O4: Chemical-Physical and Electrophysical Research

Permeability and microstructure of manganese modified lithium ferrite prepared by sol–gel auto-combustion method

Investigation of structural, morphological, and transport properties of a multifunctional Li-ferrite compound

A detailed investigation of rare earth lanthanum substitution effects on the structural, morphological, vibrational, optical, dielectric and magnetic properties of Co-Zn spinel ferrites