Abstract:Heat treatment is the most common method to relieve residual stress and to adjust tensile properties in additively manufactured material. However, the well-known strengthening factors (e.g., dislocation density, cellular sub- structure, low angle grain boundaries, nano-oxide particle) in selective laser melted 316 L (SLM 316 L) are strongly influenced by heat-treatment temperature. In this work, horizontal and vertical oriented SLM 316 L specimens are heat treated from 550 degrees C to 1150 degrees C, followed by tensile tests and microstructural characteriza- tion. With increasing temperature, strength (e.g., yield strength, ultimate tensile strength) is found to decrease and elongation is found to increase. The heat treatments of 550 degrees C, 650 degrees C and 750 degrees C lead to coarsening of cellular sub-structure. Furthermore, the cellular sub-structure and melt boundaries annihilate at 950 degrees C. When the temperature reaches 1150 degrees C, SLM 316 L has finished recrystallization with volume fraction of nano-oxide particles increasing greatly. Based on microstructural characterization, the proposed relationship, considering strengthening mechanisms of cellular sub-structure, nano-oxide particle and grain boundaries, give satisfactory accuracy to predict yield strength for horizontal orientation. The yield strength for vertical orientation can also be predicted by this relationship when modified by consideration of anisotropy of columnar grains and lack-of- fusion defects. The anisotropy and lack-of-fusion lead to 5.4% reduction in yield strength for the vertical orientation. This work establishes quantitative relationships for heat treatment-microstructure-property, in which the anisotropy of tensile properties is considered.

Effect of laser inclination angle on mechanical properties of Hastelloy X processed by selective laser melting

Mechanical Properties and Fracture Behavior of Laser Powder-Bed-Fused GH3536 Superalloy

Revealing the Interrelation Between Process Parameters and Microstructure to Promote the Mechanical Performance for Hastelloy-X

Effect of Process Parameters on the Mechanical Properties of Hastelloy X Alloy Fabricated by Selective Laser Melting

The Microstructures and Mechanical Properties of a Welded Ni-Based Hastelloy X Superalloy

Effect of Fe-based metallic glass on microstructure and properties of Hastelloy X manufactured by laser powder bed fusion

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Microstructure and Mechanical Properties of Hastelloy-X Produced by Selective Laser Melting

The effect of subsequent heating treatment on the microstructure and mechanical properties of additive manufactured Hastelloy X alloy

Tailoring the microstructure and mechanical properties for Hastelloy X alloy by laser powder bed fusion via scanning strategy

Effect of the scanning strategy on microstructure and mechanical anisotropy of Hastelloy X superalloy produced by Laser Powder Bed Fusion

Effect of Laser Energy Density on the Microstructure and Texture Evolution of Hastelloy-X Alloy Fabricated by Laser Powder Bed Fusion

High-Temperature Tensile Properties of Hastelloy X Produced by Laser Powder Bed Fusion with Different Heat Treatments

In-situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C

Experimental Characterization and Yield Strength Model for Process-Structure-Property of Selective Laser Melted 316L

Influence of scanning speed on microstructures and mechanical properties of SLM produced Hastelloy X: As-built and solution-treated

Effect of temperature on the microstructure and tensile properties of micro-crack free hastelloy X produced by selective laser melting

Mechanical properties of Hastelloy X produced by laser powder bed fusion and affected by spatter redeposition

Micro-cracking, microstructure and mechanical properties of Hastelloy-X alloy printed by laser powder bed fusion: As-built, annealed and hot-isostatic pressed

Effects of Heat Treatment on High Temperature Mechanical Property and Corrosion Resistance of Hastelloy X Manufactured by Selective Laser Melting

Microstructure and mechanical properties at room and elevated temperature of crack-free Hastelloy X fabricated by laser powder bed fusion