Abstract:Glass interposer has attracted ever-increasing attention in 2.5D/3D advanced packaging field due to its excellent mechanical performance, thermal stability, easy manufacturing process and low cost. However, the poor adhesion between the glass surface and the deposited metal layer is a severe issue resulting from the smoothness of the glass surface, which limits its widespread applications. Herein, a novel method for realizing the direct copper electroplating on TGV is presented on the basis of a silver nanowire (AgNW) conductive composite. A pre-coat containing resin is firstly applied to the glass substrate as an adhesion layer. The glass substrate, on the other hand, requires only a simple cleaning process. The AgNW is then coated on the resin layer to form the conductive seed layer. Finally, the metallization of the TGV surface is rapidly achieved by direct copper electroplating. For TGVs with a diameter of 100 μm and a thickness of 500 μm, the surface morphology characterization indicates AgNW conductive composite is successfully coated on the TGV surface with a sheet resistance of approx. 39 Ω sq-1, leading to rapid activation of the copper electroplating. The metallographic microscopy proves the asplated copper exhibits excellent coverage and plating uniformity across the TGV at 2 A/dm2 for 40 min. To further evaluate the practical performance of the as-plated copper on glass, the adhesion of the deposited copper is conducted by tape-test technique under ASTM D3359-02. The results show the copper layer has strong adhesion to the glass. Our work provides an efficacious method to directly achieve the metallization of TGV with the advantages of high metal adhesion, simple and cost-effective process. Therefore, this approach has prominent potential for application in 2.5D/3D advanced packaging.

Selective metallization of glass with improved adhesive layer and optional hydrophobic surface

Cu metallisation on glass substrate with through glass via using wet plating process

Directly Electroplated Metallization on Through Glass Via (TGV) Using Silver Nanowires Conductive Composite as Seed Layer

Study of Glass Metallization and Adhesion Evaluation for TGV Application

Robust metallic micropatterns fabricated on quartz glass surfaces by femtosecond laser-induced selective metallization

Efficient preparation of multifunctional superhydrophobic surfaces on Zr-based bulk metallic glass by electrochemical machining

Facile Electrochemical Method for the Fabrication of Stable Corrosion-Resistant Superhydrophobic Surfaces on Zr-Based Bulk Metallic Glasses

Stable superhydrophobic coating on Zr-based bulk metallic glass exhibiting excellent antibacterial property and cytocompatibility

Superhydrophobic metallic glass surface with superior mechanical stability and corrosion resistance

Design of metalized polyether-ether-ether-ketone based on semi-additive manufacture for 5G applications: from bottom-up assembly to selective electroplating

ZrO2 Superhydrophobic Coating with an Excellent Corrosion Resistance and Stable Degradation Performance on Zr-Based Bulk Metallic Glass

Deposition of Durable Micro Copper Patterns into Glass by Combining Laser-Induced Backside Wet Etching and Laser-Induced Chemical Liquid Phase Deposition Methods

Transparent and Robust Superhydrophobic Structure on Silica Glass Processed with Microstereolithography Printing

Preparation of Transparent Sandwich-like Superhydrophobic Coating on Glass with High Stability and Self-Cleaning Properties

Thermoplastic Forming of a Hydrophilic Surface with a Nanostructure Array on Zr-Cu-Ni-Al-Y Bulk Metallic Glass

Non-activation MOF Arrays As a Coating Layer to Fabricate a Stable Superhydrophobic Micro/nano Flower-Like Architecture

Metallized Liquid Crystal Polymer with Low Interfacial Roughness and Excellent Adhesive Strength Based on Semi-Additive Process for High-Frequency Signal Transmission

Selective metallization on additive manufactured polymer for fabrication of integrated device

Patternable, High-Precision, Controllable Wettability Copper Layers for 3D Resin-Based Weather-Resistant Electronics and 3D Liquid Manipulation

Rationally design of substrate surface topography toward the improvement of Cu-plated coating adhesion

Ultra-thin Metallized Glass Fabric Coated with Chitosan and Reduced Graphene Oxide for Electromagnetic Shielding with Excellent Heat Dissipation and Self-Cleaning