Abstract:The highway E39 project is proposed by Norwegian Highway Authority (NPRA), it will connect Trondheim to Kristiansand with bridges building on the fjords. Due to the large span length and the depth of the water of the fjords, the floating bridge concept is proposed. The bridge will be supported by the pontoons floating on the water. In the navigation channel, there are two towers with the cables connecting the bridge girder. In reality, this bridge has a larger possibility of experiencing ship collisions. In this thesis, the local ship bow and pontoon is conducted to propose a safe pontoon design, then the global analysis of the bridge under ship collision has been done. A pontoon steel design that is highly resistant against ship collision is investigated. After obtaining the safe design of the pontoon, collision simulations are conducted between a container ship and the pontoon in order to obtain the force deformation curve for the ship. The force deformation curve is an essential input when doing the global analysis of the bridge since the contact force between the ship and pontoon is predicted based on the curve. The global response of the bridge that subjected to ship collision is analyzed in USFOS, where the finite element model of an entire bridge is built. The ship is modelled as mass spring system with given velocity. The original bridge model has been improved by adding the pre-tension in the cables and checking the balance of the bridge. Four different cases are investigated where the ship has different sailing direction and sailing speed. The difference in the first two cases is that they have different ship speed with collision energy 158.4MJ and 440MJ respectively. The third and forth cases have different collision angel relative to the pontoon, however they have the same collision energy 440MJ. The transverse displacement of the bridge ranges from 2.4m to 3.4m in the four cases. The results of the transverse displacement obtained in USFOS are quite close to the value from hand calculation of single degree of freedom. The collision force in the four cases is quite similar, the average value of the contact force is around 35MN. The absorbed energy by the ship ranges from 66% to 72%, the ship would drift away from the bridge. The largest spring permanent deformation is 9m, it happens in the forth case, where there is a small angel between the ship and pontoon. The response of the bridge deck that right upon the ship is investigated. It is found out the transverse bending moment is relatively large, because the ship-bridge collision happens at the middle point of the bridge, it is easy to trigger large transverse bending moment. The bridge design needs to be modelled with more details, some assumptions have been made, so the analysis of the bridge is conservative.

Koege Nord Station—Conceptual, Aesthetic and Detailed Design of a Futuristic Pedestrian Bridge and Transportation Hub

Design of Trestle of Pingtan Straits Rail-cum-Road Bridge

Structural design and analysis of a large span partially single-sided cable-stayed pedestrian bridge

Innovative Technology in Channel Bridge Foundation Design and Construction of Pingtan Strait Hi-Rail Bridge

Substructure Design of Deepwater Trestle Bridge of Pingtan Strait Hi-Rail Bridge

Conceptual Design of the Pedestrian Bridge

Hærvejsbroen, New Bridge for the Ancient Road, Viborg – Denmark

Design of Underpass Bridge of Xiamen North Station on Fuzhou-Xiamen Railway

Convention and Exhibition Center Integrated into High Speed Rail Station: Experience and Idea

Parametric design and dynamic analysis of a hybrid steel‐FRP bridge.

Park station design in the context of cultural tourism integration

Trysfjord bridge, parametric analysis and modelling for drawingless construction of a concrete balanced cantilever bridge

Navigating Transitions for Sustainable Infrastructures—The Case of a New High-Speed Railway Station in Jingmen, China

Digital modelling of a double-inclined-arch-pylon cable-stayed bridge in Beijing, China

Integrale Bogenfachwerkbrücke über die A3 am Autobahnkreuz Fürth/Erlangen

Landscape Preference for Tourism Resourceization of Coastal Bridges in Busan, Republic of Korea

Structural design on the main building of South Changsha Railway Station

Exploration of Urban Development under the Guidance of New Infrastructure Planning and Design Methods—A Case study of Shenzhen Gangxia North Rail Transit Hub

Culture, Space and Urban Competitiveness: Design and the Enlightenment of Kaohsiung Mass Transit Stations

Analysis and Design Bjørnefjorden Floating Cable-Stayed Bridge subjected to Large Ship Collisions and Extreme Environmental Loads