Abstract:Fluoride is recognized as a vital ion for human and animal growth because of the critical role it plays in preventing skeletal and dental problems. However, when it is ingested at a higher concentration it can cause demineralization of teeth and bones resulting in fluorosis, therefore, the production of high-adsorptive capacity material which is also cost-effective is necessary for the treatment of fluorides. In this study, aluminium foil is valorised into alumina nanoparticles. The as-prepared alumina was modified with alum in two different ratios of 1:0.5 and 1:1 (alumina to alum w/w%) and later used as adsorbents for the removal of fluoride from groundwater. The adsorbents were characterized by Fourier transform infrared spectroscopy, point of zero charge and X-ray diffraction. Different factors that influence the removal efficiency of fluorides such as pH, initial concentrations, contact time and adsorbent dosage were studied and optimized using a simulated fluoride solution. The optimum conditions obtained were used to test real groundwater. The static experiment conditions were used to calibrate a PHREEQC geochemical model which was later used to simulate the fluoride sorption onto the modified alumina at different conditions. PHREEQC was also coupled with parameter estimation software to determine equilibrium constants for the surface reactions between the fluoride species and the adsorbent in a way that the simulations accurately reflect the outcomes of laboratory experiments. Isotherm studies were carried out on the adsorbents. Both Langmuir and Freundlich's non-linear models fitted well for the equilibrium data. However, with a higher coefficient of regression and low chi-square test values, the adsorption process was more of chemisorption on a monolayer surface. Kinetic studies were also carried out by using the non-linear equations from the pseudo-first-order and pseudo-second-order models. The pseudo-second-order model fitted well for the equilibrium data. The mechanism for the fluoride ion adsorption was also studied by the intraparticle (IP) diffusion model and was found that IP was not the rate-determining factor, and therefore the most plausible mechanism for the sorption process was ion exchange or attraction of fluoride ions to the sorbent surface. The findings obtained from this research show that readily available aluminium waste could be valorised into a useful product that could be employed in the removal of fluoride from water samples, including groundwater, that may contain too much fluoride and pose a risk to the general public's health.

Use of Aluminium Metal Embedded ThujaOccidentalis Leaves Carbon (AMETLC) for Fluoride Removal from Water: Equilibrium and Kinetic Studies

Efficient removal of fluoride on aluminum modified activated carbon: an adsorption behavioral study and application to remediation of ground water

Synthesis and characterization of aluminum-based adsorbent and application in fluoride removal from aqueous solution

Understanding fluoride adsorption from groundwater by alumina modified with alum using PHREEQC surface complexation model

Aluminium fumarate metal-organic framework: A super adsorbent for fluoride from water

Adsorption property of fluoride in water by metal organic framework: Optimization of the process by response surface methodology technique

Utilization of organic waste from Chinar leaves as sustainable and eco-friendly adsorbent for fluoride removal

Fluoride Removal from Aqueous Solutions via Adsorption Using Raw, Calcined, and Chemically Treated Laterite Mineral

Adsorption Characteristics and Charge Transfer Kinetics of Fluoride in Water by Different Adsorbents

Preparation of aluminium-hydroxide-modified diatomite and its fluoride adsorption mechanism

Experimental and DFT calculation study on the efficient removal of high fluoride wastewater from metallurgical wastewater by kaolinite

Water defluoridation by aluminium oxide–manganese oxide composite material

Modeling defluoridation of real-life groundwater by a green adsorbent aluminum/olivine composite: Isotherm, kinetics, thermodynamics and novel framework based on artificial neural network and support vector machine

Characterization and performance of novel carbon-doped aluminum-modified bentonite for cost-effective fluoride removal

Utilization of Annealed Aluminum Hydroxide Waste with Incorporated Fluoride for Adsorptive Removal of Heavy Metals

Adsorption characterization and mechanism of aluminum based chitosan/zeolite molecular sieve composite for fluoride removal

Defluoridation by Freshly Prepared Aluminum Hydroxides

Synthesis, performance, and mechanism of magnesium‐iron‐aluminum trimetal composite as an adsorbent for fluoride removal in water treatment

Adsorption removal of fluoride from polluted drinking waters using Mn-Al-La oxide

Removal of Fluoride from Water by Carbon Nanotube Supported Alumina

Granular tri-metal oxide adsorbent for fluoride uptake: Adsorption kinetic and equilibrium studies