Abstract:Parabolic Trough Collectors (PTCs) are commonly employed in both industrial and residential settings for the purpose of harnessing solar energy. Several techniques have been implemented to improve performance, such as altering the geometry of the absorber tube, enhancing the selective coatings of the receiver envelope, and utilizing nanofluids . This study proposes a new method for enhancing the thermal-hydraulic efficiency of PTCs through the utilization of non-uniform heat flux distribution on conical solar receiver. The effectiveness of this approach is evaluated through numerical simulations conducted using Ansys Fluent with the aid of optical simulation performed using TracePro. The geometry under consideration is assessed at various diameter ratios (DR) spanning from 1.25 to 2 and Reynolds number ( Re ) ranging from 20000 to 100000, with increments of 20000. This evaluation is conducted at three distinct inlet temperatures : 150 °C, 250 °C, and 350 °C. The studied parameters include-the Nusselt number ( Nu ), friction coefficient ( f ), thermal efficiency ( ηth ), exergetic efficiency ( ηex ), and thermal enhancement factor (TEF). Furthermore, a comparative analysis is conducted between the newly proposed geometric design and a traditional straight absorber and glass structure. The findings indicated that a conical receiver generally enhances system heat transfer by a minimum of 7 % and up to 65 %, resulting in improved thermal and exergetic efficiencies. Decreasing the pipe outlet diameter from DR = 1.25 to DR = 2 led to a significant exponential rise in the friction coefficient. The TEF demonstrated that a diameter ratio of 1.25 and 1.5 resulted in maximum values of 1.19 and 1.11, respectively, at high Re and an inlet temperature of 350 °C. The results suggested that incorporating conical receivers in PTCs can greatly improve their performance. To minimize the friction coefficient and associated pumping power, it is crucial to carefully evaluate the reduction of the diameter of the absorber outlet. The results offered valuable insights for the development and improvement of PTCs in both industrial and power generation settings, promoting the adoption of renewable energy and supporting long-term sustainability.

Numerical simulation of the performance of a novel parabolic solar receiver filled with nanofluid

Thermal performance simulation of parabolic trough collector with ternary nanofluid flows and half-star-shaped fins inserts in different receivers

Comparative performance assessment of different absorber tube geometries for parabolic trough solar collector using nanofluid

Numerical investigation on the effect of Al 2 O 3 -water nanofluid on direct steam generation in parabolic trough collectors

Enhanced heat transfer performance in a parabolic trough solar collector: A CFD investigation of silver and copper nanofluids utilizing porous medium

Computational single‐phase comparative study of a Williamson nanofluid in a parabolic trough solar collector via the Keller box method

Numerical study of the thermal performance of a single-channel cooling PV system using baffles and different nanofluids

Heat Transfer Enhancement in Parabolic through Solar Receiver: A Three-Dimensional Numerical Investigation

Investigating silver and alumina nanoparticles' impact on fluid behavior over porous stretching surface

Numerical analysis with experimental validation for thermal performance of flat plate solar water heater using CuO/distilled water nanofluid in closed loop

Performance Analysis of Solar Water Heater Using Al2O3 NanoParticle with Plain-Dimple Tube Design

Numerical analysis and design of a novel solar photovoltaic thermal system using finned cooling channel structures embedded with air/TiO 2 –water nano bi-fluid

Numerical investigation on the thermal performance of parabolic trough solar collector with synthetic oil/Cu nanofluids

An experimental investigation on the effect of Al2O3/distilled water nanofluid on the energy efficiency of evacuated tube solar collector

Hydrothermal performance assessment of a parabolic trough with proposed conical solar receiver

Numerical study on effect of hybrid nanofluid as a passive heat transfer enhancement technique and different climates on thermal performance in a linear Fresnel collector

Numerical investigation of thermal performance augmentation of nanofluid flow in microchannel heat sinks by using of novel nozzle structure: sinusoidal cavities and rectangular ribs

Numerical study of the effects of geometric parameters and nanofluid properties on heat transfer and pressure drop in helical tubes

Numerical simulation of the effects of superhydrophobic coating in an oval cross-sectional solar collector with a wavy absorber filled with water-based Al2O3-ZnO-Fe3O4 ternary hybrid nanofluid

Thermal Performance Analysis of Porous Foam-Assisted Flat-Plate Solar Collectors with Nanofluids

Numerical simulation of nanofluid turbulent flow in a double-pipe heat exchanger equipped with circular fins