Abstract:Heavy metals, including lead, cause serious damage to human health and the surrounding environment. Natural biosorbents arise as environmentally friendly alternatives. In this study, two of the 41 isolates (8EF and 17OS) were the most efficient bacteria for growing on media supplemented with Pb2+ (1000 mg/L). At high concentrations up to 2000 mg/L, the pioneer isolate 17OS exhibited remarkable resistance to multiheavy metals. This isolate was identified as Paenibacillus dendritiformis 17OS and deposited in GenBank under accession number ON705726.1. Design-Expert was used to optimize Pb2+ metal removal by the tested bacteria. Results indicated that four of six variables were selected using a minimum-run resolution IV experimental design, with a significant affecting Pb2+ removal. Temperature and Pb2+ concentration were significant positive influences, whereas incubation period and agitation speed were significant negative ones. The tested strain modulated the four significant variables for maximum Pb2+ removal using Box-Behnken design. The sequential optimization method was beneficial in increasing biosorption by 4.29%. Dead biomass of P. dendritiformis 17OS was embedded with polyethersulfone to get a hydrophilic adsorptive membrane that can separate Pb2+ easily from aqueous solutions. SEM images and FT-IR analysis proved that the new biosorbent possesses a great structure and a lot of surface functional groups with a negative surface charge of - 9.1 mV. The removal rate of 200 mg/L Pb2+ from water reached 98% using 1.5 g/L of the immobilized biosorbent. The adsorption isotherm studies were displayed to determine the nature of the reaction. The adsorption process was related to Freundlich isotherm which describes the multilayer and heterogeneous adsorption of molecules to the adsorbent surface. In conclusion, dead bacterial cells were immobilized on a polyether sulfone giving it the characteristics of a novel adsorptive membrane for the bioremediation of lead from wastewater. Thus this study proposed a new generation of adsorptive membranes based on polyethersulfone and dead bacterial cells.

Selective and sensitive detoxification of toxic lead ions from drinking water using lead (II) ion-imprinted interpenetrating polymer linkage

Designing of a cellulose-based ion-imprinted biosorbent for selective removal of lead (II) from aqueous solutions

Magnetic Porous Ion Imprinted Polymer Based on Surface Polymerization and Nano-ZnO as Sacrificial Support for Selective Extraction and determination of Pb (II) in Water Samples and Cosmetics

A novel lead-ion-imprinted magnetic biosorbent: preparation, optimization and characterization

Removal of toxic lead from aqueous solution using a low-cost adsorbent

Experimental design for removal of lead ions from water samples using an engineered novel chitosan functionalized Schiff-base adsorbent

Optimization of diatom-based blotting materials and their efficient selective adsorption of Pb(II)

A Disposable Electrochemical Sensor for Lead Ion Detection Based on In Situ Polymerization of Conductive Polypyrrole Coating

Remediation of water containing lead(II) using (3-iminodiacetic acid) propyltriethoxysilane graphene oxide

A facile method to achieve dopamine polymerization in MOFs pore structure for efficient and selective removal of trace lead (II) ions from drinking water

Lead-imprinted polyvinylidene fluoride membrane for selective removal of lead from contaminated water: material fabrication, filtration application, and mechanism study

Utilizing triethylenetetramine-functionalized MIP-206 for highly efficient removal of Pb(II) from wastewater

A regenerable ion-imprinted magnetic biocomposite for selective adsorption and detection of Pb<SUP>2+</SUP> in aqueous solution

Iminodiacetic acid-functionalized porous polymer for removal of toxic metal ions from water

Synthesis of magnetic mesoporous silica adsorbents by thiol-ene click chemistry with optimised lewis base properties through molecular imprinting for the rapid and effective capture of Pb(II)

Ion exchange based approach for rapid and selective Pb(II) removal using iron oxide decorated metal organic framework hybrid

Melt processing of polypropylene-grafted-maleic anhydride/Chitosan polymer blend functionalized with montmorillonite for the removal of lead ions from aqueous solutions

An immobilized biosorbent from Paenibacillus dendritiformis dead cells and polyethersulfone for the sustainable bioremediation of lead from wastewater

Preparation of a novel DNA-imprinted sensor based on chitosan and its highly sensitive detection of Pb2

Biosorption of Pb (II) by extracellular polymeric substance of Lysinibacillus sp. SS1: optimization, kinetics, and isotherms

Development of novel heteroatoms enriched nanoporous material for rapid removal of Pb(II) ions from water bodies by batch adsorption and cross-flow membrane filtration method