Abstract:Excessive exposure to noises, which corresponds to unwanted and/or unpleasant sounds, poses as a threat to people's health and can cause irritability, insomnia and even hearing loss. To attenuate noises, sound absorbers usually composed of porous materials are widely used. These, which appear as large networks of interconnected pores, are capable of absorbing medium and high sound frequencies, specially, transforming into heat the majority of the sound energy that reaches them. Such dissipations occur due to viscous, thermal and inertial losses resulted from interactions between the solid and fluid phases from which the porous materials are composed of. With the growing demand for acoustic comfort, one of the most important topics in noise control engineering is currently the search for sound absorption materials that provide attenuations in wide frequency ranges with minimum cost, weight and thickness. Fiberglass wool and melamine foam are widely used, and a variety of new porous materials are being developed, such as polymer micro- and nanofiber mats obtained by electrospinning. It is here investigated the acoustic potential of the electrospun polycaprolactone (PCL) fiber mat, normally used as a biomaterial. The sound absorption capacity of a material is given by its sound absorption coefficient ( α ), while its sound insulation capacity is denoted by its transmission loss (TL), and these are normally conflicting. In an impedance tube, through the transfer function and the transfer matrix methods, α and TL curves are here determined for samples of fiberglass wool and melamine foam with 25 mm width, and later these combined with a layer of approximately 0.3 mm of PCL fiber mat. With the addition of a fine layer of those polymeric fibers to both base materials, it was observed expressive gains in the sound absorption and transmission loss potentials in almost all the totality of the frequency range analyzed, which extends from 400 to 2500 Hz. It was also analyzed the morphology of the study materials through Scanning Electron Microscopy (SEM), and their porosities were determined through an optical approach with the aid of X-ray microtomography.

Sound absorption properties of wood-based pulp fibre foams

Extrusion Foaming Of Lightweight Polystyrene Composite Foams With Controllable Cellular Structure For Sound Absorption Application

Acoustic Properties of Glued Laminated Bamboo and Spruce-Pine-fir

Mechanic and Acoustic Properties of the Sound-Absorbing Material Made from Natural Fiber and Polyester

Preparation and property evaluation of sound-absorbing/thermal-insulating PU composite boards with cushion protection

Preparation and design of green sound-absorbing materials via pulp fibrous models

Sound Absorption Characterization of Natural Materials and Sandwich Structure Composites

Preparation and Properties of Foamed Cellulose-Polymer Microsphere Hybrid Materials for Sound Absorption

Cellulose Fibers-Based Porous Lightweight Foams for Noise Insulation

Multifunctional Cellulose Wood with Effective Acoustic Absorption

Optimizing Acoustic Performance: Electrospun Polycaprolactone Fiber Mat Associated with Melamine Foam and Fiber Glass Wool

A comparative study of smart polyurethane foam using RSM and COMSOL multiphysics for acoustical applications: from materials to component

The influence of rosin, blowing agent, and mould type on the sound insulation of paper-based foams

Sound-Absorbing and Flame-Retarding Property of Nonwoven Compounded PU foam Planks

The Acoustic Property Study of Polyurethane Foam with Addition of Bamboo Leaves Particles

Solid Wood Modification toward Anisotropic Elastic and Insulative Foam-Like Materials

A scalable high-porosity wood for sound absorption and thermal insulation

The Sound Absorption Performance of Laser-Sintered Composite Biomimetic Wood Porous Structures

Investigation on Sound Absorption Properties of Kapok Fibers

Sustainable Rigid Polyurethane Foam from Wasted Palm Oil and Water Hyacinth Fiber Composite—A Green Sound-Absorbing Material

Applications of Xylan Derivatives to Improve the Functional Properties of Cellulose Foams for Noise Insulation